Buzzing sound from gimbal

[DK43]

It started to do this sound and it makes a lot of vibrations into itself making all the films shaky. sorry for bad english. i would apreciate any help.

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

Accept third party cookies

 

[Mrktn]

It started to do this sound and it makes a lot of vibrations into itself making all the films shaky. sorry for bad english. i would apreciate any help.

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

Accept third party cookies

A big welcome to the forum from the UK!

 

[Rishu]

Gimbal

 

[Cafguy]

That could be particles stuck in the gimbal. Have you used Canned air to blow it out? DON'T its way way to much pressure for the gimbal, find a compressor and set it really low and then "dust" out the gimbal. After that, Using the tip of you finger gently move the gimbal and "feel" for grit keep repeating until you don't feel the grit.
also check all your screws and mounts and make sure the gimbal is still attached properly to the Drone.
If you have been using canned air you just may have particles that have been blown to deep into the gimble. if that happens it will need to be taken apart and cleaned. (this is why you don't wanna use air in a can)
and Welcome to the Forum from Bakersfield!