- Joined
- Feb 11, 2018
- Messages
- 35
- Reactions
- 7
- Age
- 46
DJI support only Chinese, they already started holiday because 16th and 17th in China already Chinese new year. It seem other regions doesn't do support, like USA or UK?
Last edited:
Sorry I didn't meant that, I was really frustrated. I felt my magic air defective or something is not right.ok, be a jerk. Figure it out yourself.
You provide crap for data, no pic of what versions you are actually on (your earlier photo shows you on the wrong firmware versions) and provide no info regarding your settings so we have to guess based on the warnings seen on your screen shots. I've got better things to do. I'm outta here.
BTW - anyone that clicks on his link to go to another page is taking a risk
No u have to download assistant. Hook air up to it. U should atleast be able to refresh fw!I assumed must be from this link, will give try later.
Mavic Pro– Specs, FAQ, Tutorials and Downloads
I read the release note there is no Mavic Air firmware
https://dl.djicdn.com/downloads/dji_assistant/20180102/DJI+Assistant+2+Release+Notes(1.2.0).pdf
It's seem not updated for Air
Problem solved, I can take the panorama photos now.Listen download dji's newest dji assistant 2 it can be found on mavic air downloads page dji.com
Install assistant and try to refresh firmware. If that is to much for u go into app and downgrade fw one revision then upgrade again
Good to see you got it buddy! sometimes i recommend that depending on the situation. Because i have learned (various dji ac) that sometimes some of the modules wont install correctly in fw updates....i notice this happens sometimes as well if home/mobile connection is not good while doing the update...Problem solved, I can take the panorama photos now.
What I did was:
1. Downgraded to .100 with DJI Assistant 2 with computer.
2. Disconnected from computer startup with phone like normal want to flight.
3. Prompted and updated Geo facing, precise bla".
4. Can't take off because not latest firmware.
5. Updated everything pending via phone to .200 (because my home internet slower than my mobile internet)
6. Inserted using recommended sdcard 64GB U3 v30.
7. Take off, perform 4K no issue, perform 360° panorama photo no issue.
Conclusion, perhaps the first time updated firmware not flashed correctly.
Hi Mike, I guess your advice is right, just need to refresh the firmware, not necessarily downgrade. With this experience, now at least I understand overall DJI aircraft, rc, firmware, geo facing and also unlocking individual zone, how it work.
Somehow it also fixed my synchronization in my iPhone.
Thank you.
View attachment 31581
Apparently, when the Mavic Air flies at or near the (arbitrarily set) "max altitude" limit, shooting is no longer permitted. Why this appears to applies to "stitched" photo shots, like "panoramas", but not to normal single shots, I have no idea.
Has anyone else made the same experience ?
Does anyone understand the logic that is apparently designed into the firmware ?
Guys I'm getting worried about my Mavic Air, I really confused with this warning.
I noticed that too, runway in that picture, flying at 119m altitude.Are you trolling us. You are flying in restricted airspace, near an airport. Why? Is this why your mapbox is green (I'm not sure why it would be, otherwise)?
But, from this provided photo, it appears that you are near a runway.
Yes if the aircraft is reached to maximum altitude it won't be able to take any panorama photos. I tried my altitude default 120 meters or higher 150 meters and I'm lowering about 5 to 10 meters so 110/150 or 130/150 meters or just 5 to 10 meters from ground won't take any shot.View attachment 31581
Apparently, when the Mavic Air flies at or near the (arbitrarily set) "max altitude" limit, shooting is no longer permitted. Why this appears to applies to "stitched" photo shots, like "panoramas", but not to normal single shots, I have no idea.
Has anyone else made the same experience ?
Does anyone understand the logic that is apparently designed into the firmware ?