DJI Mavic, Air and Mini Drones
Friendly, Helpful & Knowledgeable Community
Join Us Now

Controller not maintaining steady connection to phone (Galaxy S10)

mrtrickdk

New Member
Joined
Feb 19, 2021
Messages
3
Reactions
0
Age
44
Location
Arizona
Problem? When I connect my Samsung Galaxy S10 phone to the controller, the connection keeps "disconnecting" and "reconnecting". I can see the controller will try to charge my S10 phone for 2 seconds, then stops charging for 2 seconds, then it starts charging again, then disconnects. Never stops repeating this process. I am unable to obviously use the phone/controller when this happens. Issue started 2 months ago, after 1+ year of flying with no issues.
See video:
To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

Was unit in a crash? no

What have you tried so far?:
  • Tried fully charged S10 phone vs low battery. No difference.
  • Fully charged controller vs low charge. No difference.
  • Tried adjusting brightness on S10 phone
  • I bought a new USB cable from controller to S10. No difference.
  • When trying with my iPhone there are zero problems. I maintain a steady connection between iPhone and controller.

What device are you using? Samsung Galaxy S10, and also tried an iPhone. My S10 is stock, not rooted. Drone is a DJI Mavic Air

What firmware are you running ( aircraft, remote controller)? newest

What Go app version are you using? newest version

Any modification? It is all a stock

Did you change anything or install any apps? No changes other than standard Android updates etc

Do you have a video or pictures of the problem? Yes;
To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.
 
try deleting the app and then reinstalling it on you device ,also you say you purchased a new cable was it a data cable or just a charge cable
 
  • Like
Reactions: Thomas B
try deleting the app and then reinstalling it on you device ,also you say you purchased a new cable was it a data cable or just a charge cable

Thanks. I tried reinstalling (and rebooting after uninstall), same issue.
New cable is a proper data cable, specifically for Drones.
 
Have a look at this thread
Thanks. Tried that already. Same error as before.
Super strange issues....
 
Ok. Does the controller have the lower full sized usb port? If so as a work around have you tried using that port and a usb to usb- c? cable? I think you might have to disconnect the old cable from the side port first or some such thing.


Or, if the phone has a usb-c port, reversing the usb-c connector? I have seen several posts on here where that has been suggested......
 
Last edited by a moderator:
As suggested invert USB-C connector 180°...might want to check that your USB settings on phone are set to transfer data vice just charge only as well. ;)
 
HI, I have the same problema with a S10 and a Mavic Mini. Do you solved the problem?
First I had problems connecting the controller to my S10 and then this problem of continuos charging. I dont know what to do and I made this invest in order to have an income.
 
Ok. Does the controller have the lower full sized usb port? If so as a work around have you tried using that port and a usb to usb- c? cable? I think you might have to disconnect the old cable from the side port first or some such thing.


Or, if the phone has a usb-c port, reversing the usb-c connector? I have seen several posts on here where that has been suggested......
Inverting the cable at the controller's end seems to work for me. Good idea!
 
This worked for me: disable fast charging on your phone.
I had the same issue with my Samsung (S10) and on a friend's Realme phone. 👍

Failing that, as others have mentioned, inverting the connector at the controller end also worked!
 

DJI Drone Deals

New Threads

Forum statistics

Threads
134,568
Messages
1,596,335
Members
163,068
Latest member
Liger210
Want to Remove this Ad? Simply login or create a free account