Get more from your Mavic
The largest Mavic community in the world
Join Us Now

crashed mavic pro (Gimbal Vibration Board)

GunsN

Well-Known Member
Joined
Sep 12, 2018
Messages
60
Reactions
42
Age
31
Visit site
I have changed Gimbal vibration board (use this guide
crashed my mavic from 4-5 meter high.
I did everything as I have to do.
but when I turn it on, there is a compass calibration error, I did the compass calibration several time, but the same error on the screen.
any ideas? did I forget some cables or some othe thing?!
thanks for helping
 

Attachments

  • 126498626_388129225951377_743952687520619874_n.jpg
    126498626_388129225951377_743952687520619874_n.jpg
    49.4 KB · Views: 5
  • 126783395_368644894419589_1902944065605479746_n.jpg
    126783395_368644894419589_1902944065605479746_n.jpg
    70.9 KB · Views: 5

GunsN

Well-Known Member
Joined
Sep 12, 2018
Messages
60
Reactions
42
Age
31
Visit site
this error solved, but there is still this errors after change the board
please help me to solve this problem.


2.jpg 1.jpg 3.jpg
 

SpitFire

Well-Known Member
Premium Pilot
Joined
Jan 5, 2018
Messages
954
Reactions
1,232
Age
74
Visit site
Don't know how to solve that problem. But with a crash like that you could have ESC problems as well. (Electronic Speed Controller). The ESC controls the speed of the motors which directly alters the in flight aircraft directional changes, Would not worry about it unless you start getting ESC status errors. Just google for more info if it starts happening.
 

GunsN

Well-Known Member
Joined
Sep 12, 2018
Messages
60
Reactions
42
Age
31
Visit site
I have ordered ribbon flat cable and I will change my own. I think it is damaged when there was a crash.
I will post if the problem solve.