DJI Go Pro 4 Mavic 2 Pro altitude limit with LAANC authorization

[quadCOPimaging]

Good afternoon fellow Mavic Pro 2 Pilots. I am FAA Part 107 certified and have been flying the Mavic 2 Pro for over 3 months. I was flying the other day in Class D airspace to the surface. Flight auto authorized up to 200 feet (as visualized in AIRMAP). I fly with the DJI Smart Controller and use my iPhone for AIRMAP. I ascended to 90 feet and the DJI GO PRO 4 app on the smart controller displayed a warning, “flying above this altitude may cause a loss of control.” I descended. I then filed for a LAANC through the KITTYHAWK app and had authorization in a few minutes. I ascended to 90 feet and again I got the warning to keep altitude below 90ft. Anyone have this issue or can anyone direct me where I can resolve this warning after LAANC authorization? Thanks in advance.

 

[Marty Markoe]

Good afternoon fellow Mavic Pro 2 Pilots. I am FAA Part 107 certified and have been flying the Mavic 2 Pro for over 3 months. I was flying the other day in Class D airspace to the surface. Flight auto authorized up to 200 feet (as visualized in AIRMAP). I fly with the DJI Smart Controller and use my iPhone for AIRMAP. I ascended to 90 feet and the DJI GO PRO 4 app on the smart controller displayed a warning, “flying above this altitude may cause a loss of control.” I descended. I then filed for a LAANC through the KITTYHAWK app and had authorization in a few minutes. I ascended to 90 feet and again I got the warning to keep altitude below 90ft. Anyone have this issue or can anyone direct me where I can resolve this warning after LAANC authorization? Thanks in advance.

Check maximum set altitude in DJI GO.

 

[sar104]

Good afternoon fellow Mavic Pro 2 Pilots. I am FAA Part 107 certified and have been flying the Mavic 2 Pro for over 3 months. I was flying the other day in Class D airspace to the surface. Flight auto authorized up to 200 feet (as visualized in AIRMAP). I fly with the DJI Smart Controller and use my iPhone for AIRMAP. I ascended to 90 feet and the DJI GO PRO 4 app on the smart controller displayed a warning, “flying above this altitude may cause a loss of control.” I descended. I then filed for a LAANC through the KITTYHAWK app and had authorization in a few minutes. I ascended to 90 feet and again I got the warning to keep altitude below 90ft. Anyone have this issue or can anyone direct me where I can resolve this warning after LAANC authorization? Thanks in advance.

I don't think that the DJI GO 4 app knows anything about LAANC authorization, so it's just giving you the standard warnings when operating in the vicinity of airports.

 

[quadCOPimaging]

Check maximum set altitude in DJI GO.

Thank you, I will check my maximum set altitude in the DJI GO app.

 

[quadCOPimaging]

I don't think that the DJI GO 4 app knows anything about LAANC authorization, so it's just giving you the standard warnings when operating in the vicinity of airports.

Thank you for the information and the attached link. I will review and put the info to good use.

 

[Thomas B]

The max allowed altitude should have shown on the map in AirMap... As a grid....maybe expand the map to see it.

 

[quadCOPimaging]

The max allowed altitude should have shown on the map in AirMap... As a grid....maybe expand the map to see it.

Yes, AirMap displayed 200 ft authorized. I have since resolved the problem by adjusting the maximum alt. from 30m to 60m. Thank you for the assist.

 

[Thomas B]

Yes, AirMap displayed 200 ft authorized. I have since resolved the problem by adjusting the maximum alt. from 30m to 60m. Thank you for the assist.

Welcome

 

[Marty Markoe]

Yes, AirMap displayed 200 ft authorized. I have since resolved the problem by adjusting the maximum alt. from 30m to 60m. Thank you for the assist.

Glad my suggestion, "Check maximum set altitude in DJI GO," fixed the problem.

 

[quadCOPimaging]

Glad my suggestion, "Check maximum set altitude in DJI GO," fixed the problem.

Yes, and thank you for the suggestion.