Dynamic 3D Solutions Windsurfers!!!!

[Pipes101]

After reading about so many people claiming that windsurfers are worthless, I on the other hand, witness that windsurfers from Dynamic 3D Solutions worked as advertised!!

I gain an extra 2500ft and probably could have push it more. Has anybody purchased windsurfers from
www.dynamic3dsolutions.com and had similar or better results?

 

[djhoodrich]

I put two layers of aluminum and one layer of copper on mine

 

[djhoodrich]

 

[Pipes101]

You added a sticky back aluminum tape. Where can I find that at?

 

[djhoodrich]

You added a sticky back aluminum tape. Where can I find that at?

Copper is better
Look at this on eBay:

eBay

Copper Foil Tape - 3" X 10ft - EMI Conductive Adhesive / Ship from USA

 

[Pipes101]

Ok thx

 

[djhoodrich]

I have the same windsurfers you have I just put some DJ I stickers on them

 

[Pipes101]

That's what thought, I was like ****, those joints look like the pair I have[emoji16][emoji16]

 

[djhoodrich]

New record today with windsurfer Airdata UAV - Flight Data Analysis for Drones

 

[Porto]

Despite reports that windsurfer don't work well for Mavic, I decided to try it as I read someone here swear that it works.

Indeed it works. Though not by much, roughly an extra 1600ft in distance for me.

Does adding copper foil have any noticeable effect for distance?

 

[djhoodrich]

Despite reports that windsurfer don't work well for Mavic, I decided to try it as I read someone here swear that it works.

Indeed it works. Though not by much, roughly an extra 1600ft in distance for me.

Does adding copper foil have any noticeable effect for distance?

To me I think the copper reflects better then the aluminum but on mine I have 2 layers of aluminum and one layer of copper

 

[djhoodrich]

But I have the boosters and the other antennas to for my 2nd controller and to be honest I live in the city it is So much interference the wind surfers work the best

 

[Porto]

@djhoodrich Do you notice any difference before and after you added aluminum and copper tape to the 3d solutions windsurfer?

 

[djhoodrich]

I want to say yes but basically there's three layers of reflection on my surfers

 

[Porto]

I want to say yes but basically there's three layers of reflection on my surfers

Do you mind telling me by how far? I understand that it would not be the same for everybody as it depends very much on the place/condition where we fly.

It would be great if you can tell us the difference by how far and also in terms or percentage. For example, if with standard 3d solutions you can reach about 12,000ft and with your mods you can reach 15,000ft, then the difference is 3,000ft (25% increase).

Thanks!

 

[djhoodrich]

Do you mind telling me by how far? I understand that it would not be the same for everybody as it depends very much on the place/condition where we fly.

It would be great if you can tell us the difference by how far and also in terms or percentage. For example, if with standard 3d solutions you can reach about 12,000ft and with your mods you can reach 15,000ft, then the difference is 3,000ft (25% increase).

Thanks!

Airdata UAV - Flight Data Analysis for Drones W/out
Airdata UAV - Flight Data Analysis for Drones with surfers

 

[djhoodrich]

Airdata UAV - Flight Data Analysis for Drones W/out
Airdata UAV - Flight Data Analysis for Drones with surfers

before you spend any money modding your controller spend $16 on the surfer

 

[Porto]

before you spend any money modding your controller spend $16 on the surfer

Yes I already have it (see my post #10 above).

What I am curious is, how much of a difference adding layers of aluminum and coppers over the standard 3d solutions windsurfer

 

[djhoodrich]

Idk

 

[Porto]

Ok, no prob. Thanks anyway