FCC mode on Mavic 2 Pro possible?

[Chris_LSZO]

I have installed DJI GO 4 4.3.3-frida.ipa from here.
Thats the right one I think?

Chris

 

[Gommapal]

Try this one: clk.sh
Version 4.3.4 from droneuser

 

[Chris_LSZO]

I will check it out later, thank you very much.

Chris

 

[Chris_LSZO]

It works now! FCC are enabled, all looks fine.
Thank you so much!

Chris

 

[Gommapal]

It works now! FCC are enabled, all looks fine.
Thank you so much!

Chris

Remember... to be sure that FCC is enabled, when you are in the camera view minimize the app and then maximize it back. Enjoy!

 

[Chris_LSZO]

Remember... to be sure that FCC is enabled, when you are in the camera view minimize the app and then maximize it back. Enjoy!

After this it still works fine. I have to make a testflight for the final verification, but for the moment it looks good.

By the way: There are exist a workaround to skip the 500m-limitation?

Chris

 

[Gommapal]

After this it still works fine. I have to make a testflight for the final verification, but for the moment it looks good.

By the way: There are exist a workaround to skip the 500m-limitation?

Chris

If you mean altitude limitation, there’s no way for the M2

 

[Chris_LSZO]

Well, checkflight is done and FCC is working perfectly.

Chris

 

[Miceflyes]

Try this one: clk.sh
Version 4.3.4 from droneuser

This one worked lika a charm! Thanks alot. I just did a 3500m fly distance with full transmission power and only stoped due to battery level

 

[Gommapal]

This one worked lika a charm! Thanks alot. I just did a 3500m fly distance with full transmission power and only stoped due to battery level

 

[Chris_LSZO]

Need help again.
Now it doesn't work anymore...
I can start the app, the window open for about 0.5s and then close immediately. The App is still active in the tasklist, but I can't open it. After restart the app and the iPad the same.
Any hints? Reinstall?

Thanks in advance.

Chris

 

[Arpath]

Need help again.
Now it doesn't work anymore...
I can start the app, the window open for about 0.5s and then close immediately. The App is still active in the tasklist, but I can't open it. After restart the app and the iPad the same.
Any hints? Reinstall?

Thanks in advance.

Chris

It's olls valid for seven days, then you have to delete it and install again
Kind regards Thomas

 

[Gommapal]

Is it possible that the seven days trial period has expired? In this case you have to resign (reinstall) the app (every week!) or to join the Apple Developer Program (at about 100$ per year)

 

[Chris_LSZO]

Ahhhh ok, nice to know! Thanks.

Chris

 

[TZero]

The thread ( https://mavicpilots.com/threads/my-...ios-apple-only-with-fcc-boost-etc-menu.51035/) gone....

And the Droneuser site too....

 

[Fanti]

Tweak no longer works on fw released yesterday !!!

 

[TZero]

see post #172

 

[Fanti]

see post #172

The app works fine, just the fcc hack no more !

 

[Fanti]

Remember... to be sure that FCC is enabled, when you are in the camera view minimize the app and then maximize it back. Enjoy!

What exactly you mean with minimizing ?

 

[zappy54]

just close the app as tho you going to switch to other app... do not I repeat do not shutdown the app