It was stuck in one area about 500 feet away (200 feet up) and I could not get it home. It would start to descend on its own occasionally. About 32 degrees F and 3.9 mph wind.
Any advice is appreciated.
Any advice is appreciated.
It was stuck in one area about 500 feet away (200 feet up) and I could not get it home. It would start to descend on its own occasionally. About 32 degrees F and 3.9 mph wind.
Any advice is appreciated.
Please could I have the link to your Airdata log.
Here is the sharing link: |
I did the latest updates before the flight in question. Same issue before and after. Thank you.Does the aircraft have the latest firmware version ending .0300?
odd, for me and for most others the .300 firmware did fix that. try connecting drone to the dji assistant application, and press 'refresh' to re-flash .300 into it.I did the latest updates before the flight in question. Same issue before and after. Thank you.
Thank you. No cageodd, for me and for most others the .300 firmware did fix that. try connecting drone to the dji assistant application, and press 'refresh' to re-flash .300 into it.
after that, fly it with 3-5mph wind, if it still produces same messages - i think you need to open a ticket and try to replace the bird, it should not be happening. yesterday i flew if for 15min above the forest at 70m altitude with 7-10mph wind, in all modes, had no warnings at all.
also, i presume, you did not have that safety cage mounted around props, right?
i had messages popping up with .200 firmware, even while just trying to take off and gain altitude with giving full left stick up. after upgrade to .300 i did not see those messages, at least not yet.Thank you. No cage
So you were dealing with a similar issue?
Any insight, my friend?Please could I have the link to your Airdata log.