Goggles (white) no longer pairing with Mavic Pro

[Bobby_J]

My Goggles no longer pair with my Mavic Pro. All firmware is current & up to date for all devices. When it “says” it’s paired, I am not seeing the video feed on my Goggles from the Mavic Pro.

 

[MAvic_South_Oz]

You obviously have used them before together without issue.

I've never tried this with my M1P, but when I use my RE goggles with the Spark, I connect by cable (no occusync).
Can you cable connect them to see fi that works, eliminate one possible problem.

 

[Bobby_J]

Thank you for your post. Yes, I’ve used them before for several years without any issue. So let me get this straight…you suggest I cable connect my goggles directly into my controller (or Mavic Pro?) and see if I am getting video signal through the goggles?

 

[MAvic_South_Oz]

Thank you for your post. Yes, I’ve used them before for several years without any issue. So let me get this straight…you suggest I cable connect my goggles directly into my controller (or Mavic Pro?) and see if I am getting video signal through the goggles?

Yes goggles to controller, without a device.
Never tried that with my M1P, but it should work ok.
I do this with the Spark as it only has wifi and needs the cable connection.
Be interesting to see if you can set that up to and see if the problem is still present.

 

[Bobby_J]

I tried it and yes, I was able get video signal from my controller via the Goggles.

 

[MAvic_South_Oz]

I tried it and yes, I was able get video signal from my controller via the Goggles.

Well, that's something
Maybe try repairing them, not sure the best process or even if it can be done . . . once paired, you generally never have to do that again with the same goggles / controller.