Help! My mavic is restricted and I can't modify!

[VMImaging]

My controller restriction is set to 50m altitude and 80m distance I can't figure out how to change it! Won't let me adjust

Sent from my iPhone using MavicPilots

 

[BIGDAVE]

turn off beginner mode. and have fun and be careful

 

[VMImaging]

turn off beginner mode. and have fun and be careful

It is turned off, it bumps it from 30 and 30 to 50 and 80 does not let me put in new values


Sent from my iPhone using MavicPilots

 

[Drone Master]

My controller restriction is set to 50m altitude and 80m distance I can't figure out how to change it! Won't let me adjust

Sent from my iPhone using MavicPilots

Try enabling multiple flight mode and see if you can set those values.

 

[BIGDAVE]

ok sorry . I had this happen the first day and the bird wasn't calibrated properly and the other thing I was trying it on the bench and I did not have the bird powered up.

 

[VMImaging]

Found it! This system was blocking me from adjusting the max altitude! For anyone who ran into the same thing...

Sent from my iPhone using MavicPilots

 

[BIGDAVE]

Try enabling multiple flight mode and see if you can set those values.

I'm sure someone will have an answer for ya, I'm new to this myself. but I did try lol. good luck.