Hi there, welcome to the forum.
So if you hit that Vision Sensors calibrate button, what happens ?
They asked me to go to dji assistant 2. On my pc. I downloaded it and tried to calibrate my drone but im facing a freezing problems when i finish step one
Hmm, sorry I can't help there, I haven't even had to use, or even open DJI Assistant (ever, in over 3 years), or ever been asked to calibrate sensors !
Lucky I guess.
Someone should be able to help you though, stand by and hope someone that knows assistant can help you more.
Just did this on my Mavic Pro Platinum. It is actually pretty easy; I did it sitting at our kitchen table.
Yes, you need to connect your drone (I took off the props to make it easier to hold), fire up DJI Assistant, sign in and select calibration. After the tutorial you should see a full screen of black dots. You are supposed to point your drone at the screen and simulate the drone following the blue box until the screen is painted. Then it repeats itself with the bottom sensor. After that it completes the calibration and does an update.
Good luck!
Thank you brother.
I did these steps. But i faced another problem. While calibration the dji assistant suddenly freeze and i should to repeat all the steps.
What should i repair to pass this problem
Did you go thru the tutorial first?
This also happened to me; I just quit DJI Assistant, re-booted the drone and restarted the process.
I did this many times. Also the problem not solved
First i was moving all the drone. But I’ve knew the right way its to keep it stationery in the center like the tripod.OK, when looking at the black dots, are you physically moving the drone up, down and sideways to follow the blue square or are you keeping the drone stationary in the center and just pointing the drone to follow the blue square? That is what I needed to do.
First i was moving all the drone. But I’ve knew the right way its to keep it stationery in the center like the tripod.
I just finished another try and its still freezing.
Wow; sorry I could not be of more help. I'm guessing you rebooted your laptop as well as the drone, right?
I recently did a search for this and found this to be the best video for the problem. Let me know if it works.
Have you closed all other software except your OS?First i was moving all the drone. But I’ve knew the right way its to keep it stationery in the center like the tripod.
I just finished another try and its still freezing.
I have tried this many times. I saw a. post somewhere that it might be a good idea to try it on a different computer. Since I have both a desk top (iMAC) an my travel computer (Mac Book Pro), that I have the app installed on both so try to do it on the other computer.Have you closed all other software except your OS?
How much RAM do you have? Is OS current?