Lanyard anchor fittings

[THE WOMBLE]

Wanting to purchase 2 anchor fittings so as to be able to use a lanyard on a CRYSTALSKY MONITOR 7.85". Have tried the ones that are used on the MAVIC2 smart controller but the threaded shaft is the wrong diameter. Any help would be much appreciated.

 

[Grumpy D]

If you’re in US you should be able to find something at Lowe’s or Home Depot.

 

[THE WOMBLE]

If you’re in US you should be able to find something at Lowe’s or Home Depot.

ReplyThanks but will have to wait to win the lotto so as to pay for the trip from New Zealand to the US

 

[Grumpy D]

Yea hard to guess where someone is, good example of why some people share their location in their profile.

 

[THE WOMBLE]

Yea hard to guess where someone is, good example of why some people share their location in their profile.

Have tried to add my location to my profile but can not find how....old age beginning to catch-up

 

[Grumpy D]

Open your account profile (click on you’re avatar top of page), then select Account details and fill in the location/loc: box.

 

[Grumpy D]

Have tried to add my location to my profile but can not find how....old age beginning to catch-up

?

 

[JAW]

The lanyard holes on the 7.85 CS are 5mm x.80 pitch and are widely available at Lowes and Home Depot. The holes have a depth of about 5mm. What I found with the 7.85" CS is the lanyard holes are mounted on the sides of the monitor making them more or less useless as a receptacle for lanyard mounting as it would flip the monitor (and the view) 90 degrees. I suppose you could use the mounting holes with attached lanyard as a safety line or as a way to free up your hands to fiddle with the drone with the monitor hanging down from your neck. But as a method to take some of the weight off while flying..........well that just isn't happening.