Linking DJI Googles RE with two remote controllers

[AnMar]

Hello everyone!

Who can say it possible to make linking one DJI Googles RE with two remote controllers on DJI Mavic Pro? For ex. on primary remote controller use in same time monitor DJI CrystalSky + DJI RE Googles and on secondary remote use mobile device + DJI RE Googles.



Who can explain step by step how to make linking?

DJI support by e-mail does not respond to this and via chat got information these RE Goggles will not work with this drone at all.

I read more times instruction https://dl.djicdn.com/downloads/DJI+Goggles/20181230/DJI_Goggles_RE_User_Manual_EN.pdf and reviewed many times tutorial on youtube. In the instructions and in the video missed some points.



Page 13 (Coach Mode) how I understand and see on the picture can use two remote controllers and one DJI RE Goggles.

The problem linking starts at step 6 (page 14) „Select Connect Remote Controller and confirm in Googles RE“ How to Confirm that? 60 seconds going and no happens.

Step 7 (page 14) „Power on the secondary slave remote controller it with the mobile device“ Necessary define that before what are secondary and primary remote controllers?



Waiting any answers, thank you.

Best regards,

Anmar

 

[brett8883]

Hello everyone!

Who can say it possible to make linking DJI Googles RE with two remote controllers on DJI Mavic Pro? For ex. on primary remote controller use in same time monitor DJI CrystalSky + DJI RE Googles and on secondary remote use mobile device + DJI RE Googles.



Who can explain step by step how to make linking?

DJI support by e-mail does not respond to this and via chat got information these RE Goggles will not work with this drone at all.

I read more times instruction https://dl.djicdn.com/downloads/DJI+Goggles/20181230/DJI_Goggles_RE_User_Manual_EN.pdf and reviewed many times tutorial on youtube. In the instructions and in the video missed some points.



Page 13 (Coach Mode) how I understand and see on the picture can use two remote controllers and one DJI RE Goggles.

The problem linking starts at step 6 (page 14) „Select Connect Remote Controller and confirm in Googles RE“ How to Confirm that? 60 seconds going and no happens.

Step 7 (page 14) „Power on the secondary slave remote controller it with the mobile device“ Necessary define that before what are secondary and primary remote controllers?



Waiting any answers, thank you.

Best regards,

Anmar

Your question is really how to connect two pairs of goggles to the same aircraft.


You are wanting the “multi user” linking instructions also in that manual.


Linking Method
1. Put on the Primary Goggles RE and power on.
2. Use the touch panel to enter “Tools > Settings > Linking Settings”.
3. Select “Advanced Linking > Connect two sets of Goggles RE > Primary/Remote Controller” and
confirm. The linking status indicator will go solid red to wait for linking.
4. Press the Link button on the aircraft. Once linked, the linking status indicator will turn solid green.
5. Select whether to connect with the remote controller in the Goggles RE. Next, power on the
primary slave remote controller and connect it with a mobile device, if required.
6. Launch the DJI GO 4 app and enter the camera view. Press , then select “Remote Controller
Linking > Primary Remote Controller”. They will link after a few seconds.
7. Repeat the above steps for the secondary pair of Goggles RE and the slave remote controller.
Please note that you must select “Advanced Linking > Connect two sets of Goggles RE > Secondary/Remote Controller” in the Goggles RE, and then select “Remote Controller Linking > Secondary Remote Controller” on the mobile device.

Note that you can’t have a live view on the secondary remote if using a second pair of goggles. The live view for the slave remote is either the googles or on the app not both. You’ll still be able to change settings on the secondary controller but not live view.

The primary remote controller is the remote that is the master user. Usually the one who will be doing the flying or who is doing the coaching in coach mode. In your example the remote with the crystal sky

The secondary remote is the slave remote in your example the one with the mobile device

 

[AnMar]

Your question is really how to connect two pairs of goggles to the same aircraft.


You are wanting the “multi user” linking instructions also in that manual.


Linking Method
1. Put on the Primary Goggles RE and power on.
2. Use the touch panel to enter “Tools > Settings > Linking Settings”.
3. Select “Advanced Linking > Connect two sets of Goggles RE > Primary/Remote Controller” and
confirm. The linking status indicator will go solid red to wait for linking.
4. Press the Link button on the aircraft. Once linked, the linking status indicator will turn solid green.
5. Select whether to connect with the remote controller in the Goggles RE. Next, power on the
primary slave remote controller and connect it with a mobile device, if required.
6. Launch the DJI GO 4 app and enter the camera view. Press , then select “Remote Controller
Linking > Primary Remote Controller”. They will link after a few seconds.
7. Repeat the above steps for the secondary pair of Goggles RE and the slave remote controller.
Please note that you must select “Advanced Linking > Connect two sets of Goggles RE > Secondary/Remote Controller” in the Goggles RE, and then select “Remote Controller Linking > Secondary Remote Controller” on the mobile device.

Note that you can’t have a live view on the secondary remote if using a second pair of goggles. The live view for the slave remote is either the googles or on the app not both. You’ll still be able to change settings on the secondary controller but not live view.

The primary remote controller is the remote that is the master user. Usually the one who will be doing the flying or who is doing the coaching in coach mode. In your example the remote with the crystal sky

The secondary remote is the slave remote in your example the one with the mobile device

Thanks, but i wrote wrong information i have only one DJI Re Goggles. Linking not happens(