DJI Mavic, Air and Mini Drones
Friendly, Helpful & Knowledgeable Community
Join Us Now

Locktite?

SW_Drone_Guy

Well-Known Member
Premium Pilot
Joined
Jun 3, 2020
Messages
302
Reactions
876
Location
Southwest US
I recently changed the propellers for the first time on my MM. I read the manual and watched the videos and have flown since. All good. I did not use locktite and it wasn't recommended or even mentioned anywhere I looked. Anyone disagree? Should I have used blue locktite?
Thanks
 
The new props i have put on have had it already on the screws. Be sure you have all the old loctite out before you put new ones in and yes always use the blue not the red.
 
  • Like
Reactions: SW_Drone_Guy
You might want to check to see if the Loctite is compatible with the plastic. DJI uses a pre-applied thread lock compound on those screws, not the same as loctite threadlocker 242 etc. See Damage to Plastic Components from Loctite

I use Loctite of several types, but for screws that need to be removed and reattached on occasion, Vibratite can be used up to 5 times
 
Ok, it's already there and I don't need to add. Thx guys
 
Lycus Tech Mavic Air 3 Case

DJI Drone Deals

New Threads

Forum statistics

Threads
130,597
Messages
1,554,230
Members
159,603
Latest member
refrigasketscanada