MA main status panel shows next to Latest Firmware shows ABNORMAL in red,,Urgent hep wanted plz

[plainman007]

I got a brand new phone today morning REDMI NOTE 5 PRO and installed the latest version of DJI Go -4.3.14. My other brand new phone REDMI NOTE 5 has DJI Go 4.3.0. After installing the new version on the new PRO version phone. It worked better than the previous setup. My video feed didnt have tearing and smudge blocking pattern issues which i had with the prev phone.

But now all of a sudden the main status panel popped up saying firmware issue (plz recalibrate the vision sensors using dji assistant 2) but everything else works as normal. AIrcraft is able to prop spin up as normal, but i havent taken off, though it was getting ready to take off.

Is this serious ?

 

[brett8883]

I got a brand new phone today morning REDMI NOTE 5 PRO and installed the latest version of DJI Go -4.3.14. My other brand new phone REDMI NOTE 5 has DJI Go 4.3.0. After installing the new version on the new PRO version phone. It worked better than the previous setup. My video feed didnt have tearing and smudge blocking pattern issues which i had with the prev phone.

But now all of a sudden the main status panel popped up saying firmware issue (plz recalibrate the vision sensors using dji assistant 2) but everything else works as normal. AIrcraft is able to prop spin up as normal, but i havent taken off, though it was getting ready to take off.

Is this serious ?

Well the vision sensors might not be working but it’s easy to calibrate them with Assistant 2 but if you don’t have a computer handy you can just do a field calibration which will be in the details of the status menu. It’ll do a good enough job to get your through till you can get to a computer. Takes like 4 mins

 

[plainman007]

Hi, will this force us to upgrade the firmware when doing it thru a pc or something ?

 

[brett8883]

Hi, will this force us to upgrade the firmware when doing it thru a pc or something ?

No. If you aren’t on the latest firmware it may mask you to but you don’t have to.

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

Accept third party cookies

 

[plainman007]

Hi, already have this video, and used it when i first purchased my MA about 8-9 months ago. What i dont have is a video showing the quick vision sensors calibration. Searched youtube and couldn't find any. If you have a link or something will help.

 

[brett8883]

Hi, already have this video, and used it when i first purchased my MA about 8-9 months ago. What i dont have is a video showing the quick vision sensors calibration. Searched youtube and couldn't find any. If you have a link or something will help.

From the manual:

Quick Calibration
When a vision system calibration is required, DJI GO 4 sends a notification. If a computer is not nearby, however, a quick calibration can be performed in the app.

Tap the Aircraft Status bar and Vision Sensors to start quick calibration.
Quick calibration is only a quick fix for vision system issues. When possible, connect the aircraft to a computer to carry out a full calibration using DJI Assistant 2 for Mavic.
Only calibrate on textured surfaces such as grass or when lighting conditions are adequate.
Do not calibrate the aircraft on highly reflective surfaces such as marble or ceramic tiles.