Made these on printer works perfectly

[Keule]

Where can I get invisible PLA? I think I need some.

It's hard to find ... but I managed to get some
Works well, but I am always having trouble finding the end of the filament ... LOL

 

[vidlid]

What the heck is a Romulan?
??

You must be 10 years old

 

[X6TOE]

 

[X6TOE]

What did you make?

 

[Capt KO]

Sorry tried to up load a video but want let meView attachment 97594

Mini front arm stiffener? How does it work? Post your video to YouTube then link it here

 

[Capt KO]

Thank you to all of you who posted previously. I was due for a good laugh. ??

 

[X6TOE]

Mini front arm stiffener? How does it work? Post your video to YouTube then link it here

Mini front arm stiffener? How does it work? Post your video to YouTube then link it here

 

[X6TOE]

DJI Mavic Mini Arm Stiffener by redpiyaya

This is to make the arms sturdier, thus less motor vibrations. I got this idea from Lindsay White but made my own model from scratch. Printed 0.4mm PETG 100% infill. Removed foam and super glued the part.

www.thingiverse.com

 

[Capt KO]

DJI Mavic Mini Arm Stiffener by redpiyaya

This is to make the arms sturdier, thus less motor vibrations. I got this idea from Lindsay White but made my own model from scratch. Printed 0.4mm PETG 100% infill. Removed foam and super glued the part.

www.thingiverse.com

It Works! Replacing the foam insert with plastic? Or does it cover the original filler? I don’t have a printer. Wish I did.
Never mind you already answered above. Thanks

 

[EyesWideShut]

I like the idea! Question: With the removal of the foam and the addition of the 2 printed stiffeners plus glue, do you know how much weight is added? I'm thinking that the design could be changed a bit to minimize weight, by having some bracing instead of the solid fill or just drill some holes in the printed panel. Might help keep it closer to 250 grams for those who need it.

 

[Keule]

do you know how much weight is added?

Just made a print of the original files supplied by @X6TOE



then i made a minor modification and put some holes in it. The result is:

 

[Papa007]

is it possible to get a copy of the file so I can print my own. Thx

 

[Thanev]

It's hard to find ... but I managed to get some
Works well, but I am always having trouble finding the end of the filament ... LOL

View attachment 97590

Had the same problem with mine until I put tape on the end
Much easier to find....see?

 

[X6TOE]

is it possible to get a copy of the file so I can print my own. Thx

DJI Mavic Mini Arm Stiffener by redpiyaya

This is to make the arms sturdier, thus less motor vibrations. I got this idea from Lindsay White but made my own model from scratch. Printed 0.4mm PETG 100% infill. Removed foam and super glued the part.

www.thingiverse.com

 

[X6TOE]

Just made a print of the original files supplied by @X6TOE

View attachment 97632

then i made a minor modification and put some holes in it. The result is:

View attachment 97633

I like the idea! Question: With the removal of the foam and the addition of the 2 printed stiffeners plus glue, do you know how much weight is added? I'm thinking that the design could be changed a bit to minimize weight, by having some bracing instead of the solid fill or just drill some holes in the printed panel. Might help keep it closer to 250 grams for those who need it.

 

[X6TOE]

View attachment 97684

 

[X6TOE]

with all the foam removed the weight is still 250g

 

[X6TOE]

Just made a print of the original files supplied by @X6TOE

View attachment 97632

then i made a minor modification and put some holes in it. The result is:

View attachment 97633

 

[X6TOE]

Just made a print of the original files supplied by @X6TOE

View attachment 97632

then i made a minor modification and put some holes in it. The result is:

View attachment 97633

 

[X6TOE]

What did you make?