Mavic 2 Pro 4K 60FPS?

[Captain Oveur]

Mavic 2 Pro 4K 60FPS Firmware upgrade? Likelihood? Never? Thoughts...?

 

[Levitate]

Never. The processor can't handle it. It already has to basically do pixel-binning because it can't handle using the full 1" sensor.

 

[Kilrah]

Never. Even if it technically could it's basically one of the very few things left for them to push people to buy a new aircraft in a year or 2, so they certainly wouldn't waste it.

 

[Levitate]

My prediction - January 2020 - Mavic 2 Pro (Platinum). It will do 4K60 and use the full sensor like the P4P/2.0 did for sharper video. Also have ADS-B receiver.

 

[Captain Oveur]

My prediction - January 2020 - Mavic 2 Pro (Platinum). It will do 4K60 and use the full sensor like the P4P/2.0 did for sharper video. Also have ADS-B receiver.

What is a DSB receiver?

 

[ZX14-R]

What is a DSB receiver?

Sends a signal o Aircraft to let them know where you are. It will receive messages/warnings that should display on your controller.

 

[Chieftain]

ADS-B receiver does not broadcast the drone location. It only receives location information of local air traffic for notification to the UAS pilot.

 

[Levitate]

Exactly. DJI already said they would put it in all their drones (above 250g) after January 2020. They call it "Airsense". See here:

 

[jctarvin]

My prediction - January 2020 - Mavic 2 Pro (Platinum). It will do 4K60 and use the full sensor like the P4P/2.0 did for sharper video. Also have ADS-B receiver.

if i need 4k 60p, I just put the m2p in its case and pull out my p4p.

 

[GadgetGuy]

if i need 4k 60p, I just put the m2p in its case and pull out my p4p.

Alternative on the M2 is 2.7K @60fps. Not 4K, but close enough for government work!

 

[FormerMember07122019_2]

ADS-B receiver does not broadcast the drone location. It only receives location information of local air traffic for notification to the UAS pilot.

A small clarification. ADS-B has two flavors, ADS-B In which receives, and ADS-B Out which transmits. Airsense is ADS-B In.