Mavic 2 Pro Zoom

[yamahu]

I have problem with controller stick (left one)
I did many Stick Calibration after receiving message "STICK ERROR"
After calibrating all seems good until I touch left stick even little. After releasing stick doesn't go back to 0%.
In photo show 6% but sometimes is 9% or 8%
So revolution keep up and Drone start rising.
Any ideas
Cheers

 

[sar104]

Unfortunately that looks like a hardware problem - you are probably going to need to get the controller replaced.

 

[yamahu]

Thats what's I think too. I guess my warranty is over. It's one year, right ?
Thanks

Unfortunately that looks like a hardware problem - you are probably going to need to get the controller replaced.

 

[FoxhallGH]

Just a thought ... The controller uses very sensitive 'Hall Effect' transducers to turn the stick movements into control movements to be transmitted to the drone. It is possible to upset the transducers around a stick-set if you are wearing a very heavy metallic watch - or even a ring. I've also heard of this happening with an Apple Smart-watch - and personally experienced this when I used to leave a NetDot magnetic USB tip in the side port of my RC controller.
Make sure you do the stick calibration away from anything remotely magnetic and see if the Mavic will hover and position-keep when the controller is just put on the ground and you step away from it.

 

[zappy54]

happened to me when I left the Controller near my hifi recalibrate fixed it....

 

[Jet skier]

That is similar to what happened to me and they ended up replacing the stick modules