Mavic air gimbal not resting horizontal levels when started up but after 1.5 battery use warning comes up gimbal motor overload and gimbal freezes at

[Drewdleboy]

Hi ..I have problem with 2nd hand mavic air 1
On rest the gimbal sits at approx 5 degrees to left when powered up it levels ,after using 1.5 batteries the overload gimbal motor warning comes up and gimbal goes to approx 15 degrees to left ..and will motor relevel unless physically by hand ..hmmany help or advice would be appreciated please

 

[akdrone]

Be aware that it may be the controller and not the gimble itself! I had a different gimble problem and DJI replaced the aircraft only to find out it was the controller, not the aircraft causing the problem. Yours does sound like it’s the aircraft but that’s what I thought with mine too.

 

[KI5RLL]

Hi ..I have problem with 2nd hand mavic air 1
On rest the gimbal sits at approx 5 degrees to left when powered up it levels ,after using 1.5 batteries the overload gimbal motor warning comes up and gimbal goes to approx 15 degrees to left ..and will motor relevel unless physically by hand ..hmmany help or advice would be appreciated please

What did it do after a gimbal calibration?