I was working with the aircraft DAT, but they are in both DATs. Slightly different timing data in the tablet DAT:
98.439 : 6883 [L-FMU/FSM]near ground
99.361 : 6929 [L-FMU/MOTOR]safe_near_grd:true
99.464 : 6934 [L-FMU/FSM]not near ground
99.523 : 6937 [L-FDI][CTRL]: fault on , tilt_ctrl_fail
99.540 : 6938 [L-FMU/MOTOR] Stop. reason:roll over or atti fail
99.540 : 6938 [L-FMU/MOTOR]Total start times: 1, time: 99.52
99.541 : 6938 [L-PWM]set actuator mode:IDLE
99.541 : 6938 [L-FLYMODE]CTRL reset all by motor stopped
99.543 : 6938 [L-RC]craft ctrl failed!!!
99.544 : 6938 [L-FMU/FSM]state changed. cur: motor off
99.545 : 6938 [L-FDI][CTRL]: fault off, tilt_ctrl_fail
99.558 : 6939 [L-IMU]set imu switch level = 1