I can't say yea or nay but aside from anything else, there will be the need to calibrate the old camera/new board combination using Python and the associated scripts.Hi guys I need some advice is it possible to swap mini 1 core board with mini se?
Thanks for the reply the only reason why I wanted to change the board is because I'm getting a downward vision sensor error and can't take off I have not changed the 3in1 ribbon cable to see if that will sort out the issue I asked this question only because I can buy a second hand mini se board cheaper than the 3in1 cable but I think I will rather just buy the cable then end up having bigger problems using the mini se board.I can't say yea or nay but aside from anything else, there will be the need to calibrate the old camera/new board combination using Python and the associated scripts.
Then, depending which way you want to do the swap, you have the problem of fitting a square pin into a a round hole i.e mUSB vs probably USB-C connections. i.e you may have to file the shell to accept the new USB connector
There might also be voltage problems but that is pure speculation, the power/ESC board may take care of that by design.