Mavic Mini propellor warped..

[Flite1]

Was having issues with messages on esc faults, prop over speeding, and beeping alerts on landing. Figured the fault lay with rear props, so I swapped with fronts, opposite sides of course, and decided to stand the drone on end instead of in the flymore case (rear Props underneath with drone above) now flies smoother, no warnings, no beeping esc issues...phew !!

 

[boblui]

The flymore case actually has space cut out for accomodating the props but you need to position the props correctly before putting the drone into the case.

 

[Flite1]

The flymore case actually has space cut out for accomodating the props but you need to position the props correctly before putting the drone into the case.

You are correct, and I had not taken this precaution earlier....thanks for the information I should have had the nous to work out earlier.

 

[Phergie]

I am getting the same over speeding / warped prop message on my MM!. I store my MM1 in my flymore case and give the bottom props props plenty of room. On the rear topside props, however, I have utilized the rubber prop retainer to keep them in place. Could this rubber strap be causing the problem?