That’s just it guys I don’t have the apple airply function on the iPad only mirror function when I open the control panel
Have you followed these steps in setting up Apowermirror - tell us what you have done, what step is giving you problems ???
1) Just set up the glasses to connect to your home internet and connect the ipad to the home internet as well. (this configuration is what causes some latency, in the field you either need to hotpsot on the ipad/
BT-300 or setup up a mi-fi (mobile wifi).
2) Then run Apowermirror in the
BT-300 first, on the main screen you'll see to the right, an icon of a man with his arm up, you'll also see a square icon with ** in it. If you select this square icon you'll go to the settings page. On the settings page, the
BT-300 virtual keyboard will be blocking the options, select the down arrow at the bottom of the page (black border area) to turn it off, then tap the "detect" button to select it.
3) Run Apowermirror on the iPad, you'll see in the middle of the page the "mirror" icon, tap on this and you'll see listed "Apowermirror(EMBT3C)" this is the
BT-300 glasses, select this by tapping on it.
If you have opened Apowemirror on both the
BT-300 and iPad and have successfully set up the
BT-300 to "detect" and have selected "mirror" on the iPad Apower mirror app.
4) Then open the iPad control function by dragging down from the top right of the screen and then tap on the iPad mirror button you should see a list of devices you can connect to in the drop down menu.
"Apowermirror EMBT3C" should be listed, tap on it to select it for the method of casting the Ipad screen.
Do you see the Apowermirror EMBT3C listed in the IPad mirror device list (in the control panel), if not you haven't opened the Apowermirror app on the iPad and hit the cast button and selected "Apowermirror EMBT3C".
You can only select the mirroring method in the iPad control panel after you have started the casting from Apowermirror first.
Both Apowermirror apps on both devices must remain open in the background, you can then use the iPad home key to get back to the home page and open up DJI Fly.