PLEASE HELP!!! Mavic 2 Zoom radio signal quality switches from good to poor and stays there.

[Warren36bolton]

You manually select either 2.4 or 5.8 GHZ and auto will switch between frequencies in the band you select ... but it doesn't swap between 2.4 and 5.8 GHz.
If you are getting interference on 2.4 GHz, you may find that 5.8 GHz has less.

Hi how to switch from 2.4 to 5.8 . On Mavic 2 zoom I just can’t see how to switch thanks

 

[JDawg]

Hi how to switch from 2.4 to 5.8 . On Mavic 2 zoom I just can’t see how to switch thanks

 

[Warren36bolton]

Here is what I see:View attachment 53721View attachment 53722View attachment 53723View attachment 53724

Hi I have Mavic 2 zoom .my signal strength is a good green line is that’s good are bad thanks ??

 

[Warren36bolton]

Hi how to switch from 2.4 to 5.8 . On Mavic 2 zoom I just can’t see how to switch thanks

Meaning the wave line that runs from left to rite mine is all green is that’s good at ebad thanks

 

[Warren36bolton]

And the wave line is low to the bottom is that good

 

[nd4wmike]

Hi I have Mavic 2 zoom .my signal strength is a good green line is that’s good are bad thanks ??

Hi I have Mavic 2 zoom .my signal strength is a good green line is that’s good are bad thanks ??

Green is Good

 

[nd4wmike]

Meaning the wave line that runs from left to rite mine is all green is that’s good at ebad thanks

Good

 

[nd4wmike]

And the wave line is low to the bottom is that good

Good

 

[nd4wmike]

Good

Look at your status screen and it will show "good" or " poor">

https://mavicpilots.com/attachments/image1-jpeg.53721/

 

[Warren36bolton]

Hi how to switch from 2.4 to 5.8 . On Mavic 2 zoom I just can’t see how to switch thanks

Sorted

Green is Good

thanks a lot for your help

 

[nd4wmike]

goto this selection: HD from menus
and you can auto auto or pick the frequency you want , 2.4 or 5.8 .
I think most use auto because it is supposed to pick the best choice and automatically switch . I use dual and never have any problem .
This problem I started this thread with is now fixed in the updated before the one we just got .
Mike