- Joined
- Oct 3, 2018
- Messages
- 27
- Reactions
- 4
Hi folks!
I just want to share my previous experience pertaining to the said error.
I encountered the 'The ''Processor chip critically overheated..." error TWICE.
1st: NORMAL turning ON of aircraft & controller only.
Solution: Reboot the aircraft.
2nd: When I applied the 'Inconsistent Firmware Update' prompt.
2.1) After applying the firmware, I got notified w/ 'Processor chip critically overheated. The aircraft will turn off in 30 seconds'
- The aircraft's top portion (near the GPS & vent) was really too hot after the upgrade process was successfully applied.
So I immediately removed the battery just right after the aircraft automatically Shutdown itself.
- I wasn't able to power cycle/ reboot the controller after the upgrade as process didn't prompt/ require me UNLIKE the usual.
I did the following procedure given by DJI Support which so far seems solved the issue:
1) Performed 'Restore Factory Defaults' via DJI Assistant app.
2) Performed firmware 'Refresh' (01.00.0400).
3) Calibrate IMU and Compass.
Now, I'm on 01.00.0500 firmware, so far I haven't encountered the issue.
Any ideas what's the cause of ''Processor chip critically overheated' issue?
Thanks!
I just want to share my previous experience pertaining to the said error.
I encountered the 'The ''Processor chip critically overheated..." error TWICE.
1st: NORMAL turning ON of aircraft & controller only.
Solution: Reboot the aircraft.
2nd: When I applied the 'Inconsistent Firmware Update' prompt.
2.1) After applying the firmware, I got notified w/ 'Processor chip critically overheated. The aircraft will turn off in 30 seconds'
- The aircraft's top portion (near the GPS & vent) was really too hot after the upgrade process was successfully applied.
So I immediately removed the battery just right after the aircraft automatically Shutdown itself.
- I wasn't able to power cycle/ reboot the controller after the upgrade as process didn't prompt/ require me UNLIKE the usual.
I did the following procedure given by DJI Support which so far seems solved the issue:
1) Performed 'Restore Factory Defaults' via DJI Assistant app.
2) Performed firmware 'Refresh' (01.00.0400).
3) Calibrate IMU and Compass.
Now, I'm on 01.00.0500 firmware, so far I haven't encountered the issue.
Any ideas what's the cause of ''Processor chip critically overheated' issue?
Thanks!