I'm going to try this later today. I'll let ya know what happens.
Sent from my SM-T280 using MavicPilots mobile app
Sent from my SM-T280 using MavicPilots mobile app
Rc signal lost!!!
- Thread starter mandyjr
- Start date
It was the latest one that came out a week or two back. I'll give you the number later today when I recalibrate everything.
Sent from my SM-T280 using MavicPilots mobile app
Referring to the DJI recalibration fix you listed above. If that doesn't work I'll either reflash or downgrade.
Sent from my SM-T280 using MavicPilots mobile app
- Joined
- Feb 25, 2017
- Messages
- 58
- Reactions
- 2
- Age
- 34
Okay lmk what your results are. And if it works what your process was. Thank you!
Sent from my iPhone using MavicPilots
Sent from my iPhone using MavicPilots
- Joined
- Feb 25, 2017
- Messages
- 58
- Reactions
- 2
- Age
- 34
Tried reformatting and calibrating everything with same results. Any luck with downgrading. Do you know the firmware number?
Sent from my iPhone using MavicPilots
- Joined
- Feb 25, 2017
- Messages
- 58
- Reactions
- 2
- Age
- 34
halley
Well-Known Member
Anyone getting less than 100 feet ~ 30 meters range without a steel plate between themselves and the drone has defective equipment. Return it and get it repaired or replaced. These things should be good for hundreds of meters even with heavy interference.
It is likely an antenna was cut or disconnected, often through assembly error and no fault of the user. Operating a radio transmitter without an antenna will burn up the internal radio circuits, so plugging the antenna back in after the fact will not correct the problem.
It is likely an antenna was cut or disconnected, often through assembly error and no fault of the user. Operating a radio transmitter without an antenna will burn up the internal radio circuits, so plugging the antenna back in after the fact will not correct the problem.
- Joined
- Feb 25, 2017
- Messages
- 58
- Reactions
- 2
- Age
- 34
Did this and still have signal loss and video lag. The Go4 app version is 4.0.3. I'm going to downgrade to 4.0.2 and see what happens.
Sent from my SM-T280 using MavicPilots mobile app
- Joined
- Feb 25, 2017
- Messages
- 58
- Reactions
- 2
- Age
- 34
Your talking about the app version I thought it was the mavic firmware you were talking about. How do you downgrade the apps veraion
Sent from my iPhone using MavicPilots
Sent from my iPhone using MavicPilots
Cutaway
Well-Known Member
- Joined
- Feb 12, 2017
- Messages
- 70
- Reactions
- 49
Hey Mandy
1. Don't bother with the signal booster. No worky for me.
2. I live in a top 10 city in USA. In my backyard, I get about 1,000 ft. At a nearby track field, I got 2,500 ft.
I have to drive to the beach to get 5,000+ ft. Over water...
Haven't had the big balls to go farther...
Sent from my iPhone using MavicPilots
- Joined
- Feb 25, 2017
- Messages
- 58
- Reactions
- 2
- Age
- 34
- Joined
- Feb 25, 2017
- Messages
- 58
- Reactions
- 2
- Age
- 34
Cutaway
Well-Known Member
- Joined
- Feb 12, 2017
- Messages
- 70
- Reactions
- 49
Hey Mandy,
It's hard for us to guess without more data.
Like I said, I get weak signal warnings around 1,000 ft. It's a dense residential area with tons of WiFi at 2.4 Ghz. And when the Mavic is 1,000 ft away, the signal is going thru multiple houses.
The best thing for you to do is drive some distance where you're in an open area.
If you only get 1,000 ft. there, you got a mad bird.
Sent from my iPhone using MavicPilots
Sorry too many numbers rolling around in my head. .0400 FW
Sent from my SM-T280 using MavicPilots mobile app
- Joined
- Feb 25, 2017
- Messages
- 58
- Reactions
- 2
- Age
- 34
@mandyjr your signal strength will vary greatly due to local interference and line of sight. If you don't have direct line of sight (the Mavic goes behind a building or trees) then you can expect the signal to drop quite quickly. You will also get better results by flying over open water as the signal can bounce off the water back up at the Mavic, increasing its strength.
You should test your drone out in different locations before doing any further recalibrating. Sometime recalibrating can do more harm than good (if you calibrate incorrectly).
You should test your drone out in different locations before doing any further recalibrating. Sometime recalibrating can do more harm than good (if you calibrate incorrectly).
- Joined
- Feb 25, 2017
- Messages
- 58
- Reactions
- 2
- Age
- 34
Hey Mandy,
It's hard for us to guess without more data.
Like I said, I get weak signal warnings around 1,000 ft. It's a dense residential area with tons of WiFi at 2.4 Ghz. And when the Mavic is 1,000 ft away, the signal is going thru multiple houses.
The best thing for you to do is drive some distance where you're in an open area.
If you only get 1,000 ft. there, you got a mad bird.
Sent from my iPhone using MavicPilots
Thank you I'm going to try that out tomorrow I'll let you guys know what my results were
Sent from my iPhone using MavicPilots
- Joined
- Feb 25, 2017
- Messages
- 58
- Reactions
- 2
- Age
- 34
Hey guys went out today to an open area. I went out 8400ft never even lost a bar. I guess it's just local interference
Sent from my iPhone using MavicPilots
Sent from my iPhone using MavicPilots
Similar threads
DJI Drone Deals
New Threads
-
-
After repairing the gimbal, the camera points about 15 deg to the right! No error codes.
- Started by Interceptor650
- Replies: 2
-
-
FOR SALE: DJI RC PRO Controller, $750 ($1199 Value!)- Started by E.T. DRONE HOME
- Replies: 0
-
Mini 4 Mongolia: Mongol Cuture & Traditions (A visit to the Eagle Hunter's Home)- Started by MPone
- Replies: 1
Forum statistics
