Hi,
How do you set the RTH function?
Im a newbie!
Thanks
It's in the aircraft menu settings, not sure if you're using Go4, or Fly app (more likely as a newbie), read your pdf manual (download from online and save to your device) or scroll through all settings to learn what's there.
You'll find it.
Most times RTH is automatically on new drones, and like that unless you turn it off . . . after a firmware update, it may need checking again as it will reset on and old height.
Height !
Needs to be checked and set for
every flight to go above surrounding terrain, tress, etc.
It is good to do this even if you generally have RTH turned off, as in the event of a loss of controller signal it will also auto RTH, so the setting height is still very important.
Edit - Oh, and it's usually set to 30m default, and while this might get you above most surrounding objects, it also puts you uo higher than necessary a lot of the time, where there is stronger wind a lot of the time.
Setting RTH at enough clearance, plus a safety factor (maybe + 6 or 7m) is better.
An example is flying from a peak out over a valley, you may only need to set RTH to say 5m.