some guy doing an FCC hack permanent for RC pro Controller

[Christof.]

Bonjour Chris Oui très bien, je l'ai aussi fait avec eux et ça marche bien, vous pouvez faire le firmware jusqu'à 1700, pas la version 1800.

Ok Thank you

 

[Christof.]

I contacted the guy and he asked me for the firmware version.
Is this the RC version?
In my case it's 01.03.1800
1800 IS not good ?
Thanks

 

[Christof.]

Is it possible to roll back the RC firmware?
Thank you

 

[Agaam]

I contacted the guy and he asked me for the firmware version.
Is this the RC version?
In my case it's 01.03.1800
1800 IS not good ?
Thanks

yes the firmware of the Rc. you're better off going back to version 1400

Is it possible to roll back the RC firmware?
Thank you

you have contact via telegram? with him

 

[Christof.]

yes the firmware of the Rc. you're better off going back to version 1400

you have contact via telegram? with him

I contacted him on the site's Chat.
But I don't know how to recover and downgrade to the 1400 version, sorry.

 

[Christof.]

I contacted him on the site's Chat.
But I don't know how to recover and downgrade to the 1400 version, sorry.

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

Accept third party cookies

He gave me this link

 

[Agaam]

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

Accept third party cookies

He gave me this link

Do you also have teamviewer? and a PC? and card reader?, then I could help you remotely.

 

[Christof.]

Do you also have teamviewer? and a PC? and card reader?, then I could help you remotely.

No, Teamwiever, I don't have it and I'm not installing it, sorry.
PC yes and card reader yes.
Thanks

 

[Agaam]

No, Teamwiever, I don't have it and I'm not installing it, sorry.
PC yes and card reader yes.
Thanks

Connect the Rc to the PC, and then start the DJI program.

 

[Christof.]

Connect the Rc to the PC, and then start the DJI program.

DJI Assistant 2 ??

 

[Agaam]

DJI Assistant 2 ??

Yes, First install DJI Assistant 2, then connect RC via USB.

downgrade to version 1400

 

[Christof.]

Yes, First install DJI Assistant 2, then connect RC via USB.

downgrade to version 1400

Ok i have DJI A2 on PC no problem.
Why 1400 or not 1700 ??
Thanks

 

[Agaam]

Ok i have DJI A2 on PC no problem.
Why 1400 or not 1700 ??
Thanks

Otherwise, fccmod will not work

 

[Christof.]

Otherwise, fccmod will not work

OK, but what about the drone and the batteries?
Will the RC downgrade have an impact on them?
Thanks

 

[Agaam]

OK, but what about the drone and the batteries?
Will the RC downgrade have an impact on them?
Thanks

No problem to that

OK, but what about the drone and the batteries?
Will the RC downgrade have an impact on them?
Thanks

No problem, this is actually easier than the drone, you can simply update the firmware of the drone, except for the RC which you can upgrade to 1700 after the hack.

 

[Christof.]

No problem to that

No problem, this is actually easier than the drone, you can simply update the firmware of the drone, except for the RC which you can upgrade to 1700 after the hack.

OK for the information.
And if one day I want to remove the FCC mode, is that possible?

 

[Agaam]

OK for the information.
And if one day I want to remove the FCC mode, is that possible?

yes that is possible, then you just put version 1800 on it

 

[Christof.]

yes that is possible, then you just put version 1800 on it

OK, when I plug RC into PC: device not recognised.
Unbelievable!

 

[Agaam]

OK, when I plug RC into PC: device not recognised.
Unbelievable!

First start the program, then connect RC.

 

[Christof.]

First start the program, then connect RC.

OK, but it doesn't work.
I even put DJI A2 new version, it's the same.
My PC is running W10.