some guy doing an FCC hack permanent for RC pro Controller

[DAFlys]

unfortunately it stopped working. They managed to block it.

Thx. I assume no one’s heard from sincoder working on newer versions.

 

[cinars]

unfortunately it stopped working. They managed to block it.

I also did an update. ADB is active but without FCC... What can I do to get FCC again?

 

[Agaam]

I also did an update. ADB is active but without FCC... What can I do to get FCC again?

New firmware 01.03.1800 does not allow installing FCC patch and 5.8 GHz yet
Installation is possible only up to firmware 01.03.1700 inclusive!
Be careful when updating!

 

[cinars]

New firmware 01.03.1800 does not allow installing FCC patch and 5.8 GHz yet
Installation is possible only up to firmware 01.03.1700 inclusive!
Be careful when updating!

It is to late... i do it
Do you know how I can roll back to the previous Firmware to activate FCC again.

 

[DAFlys]

I also did an update. ADB is active but without FCC... What can I do to get FCC again?

Did you do the manual file copy part? I’ve never had to do it before but perhaps this time it is needed?

New firmware 01.03.1800 does not allow installing FCC patch and 5.8 GHz yet
Installation is possible only up to firmware 01.03.1700 inclusive!
Be careful when updating!

did you also do the manual steps for copying files they added to the instructions? I’ve never needed to before but maybe this time it’s important.

 

[Agaam]

Did you do the manual file copy part? I’ve never had to do it before but perhaps this time it is needed?

did you also do the manual steps for copying files they added to the instructions? I’ve never needed to before but maybe this time it’s important.

I'll try to write a description tomorrow

 

[cinars]

Did you do the manual file copy part? I’ve never had to do it before but perhaps this time it is needed?

did you also do the manual steps for copying files they added to the instructions? I’ve never needed to before but maybe this time it’s important.

Which files you mean? Currently I downgrade on Firmware02.02.0300 and activate fcc again

 

[DAFlys]

Which files you mean? Currently I downgrade on Firmware02.02.0300 and activate fcc again

The ones shown in the instruction video.

 

[guerravic]

It is to late... i do it
Do you know how I can roll back to the previous Firmware to activate FCC again.

Go back to 01.03.1700 with DJI Assistant 2 and apply the path again.

 

[Christof.]

Hello everyone
What do you think of this for my Mini 3 with RC screen?

DJI RC Mini 3 and Mavic 3 FCC Hack • FCC mod for DJI Drones. Air 2S, Mini 3, Mavic 3 Pro, RC, RC Pro

FCC Hack for DJI RC. For Mini 3 and Mavic 3. Enable FCC, 5.8 Ghz. Remote installation.

fccmod.com

Many thanks
Chris

 

[Agaam]

Hello everyone
What do you think of this for my Mini 3 with RC screen?

DJI RC Mini 3 and Mavic 3 FCC Hack • FCC mod for DJI Drones. Air 2S, Mini 3, Mavic 3 Pro, RC, RC Pro

FCC Hack for DJI RC. For Mini 3 and Mavic 3. Enable FCC, 5.8 Ghz. Remote installation.

fccmod.com

Many thanks
Chris

Hello Chris Yes very well, I also did it with them and it works well, you can do the firmware up to 1700, not the 1800 version.

 

[Christof.]

Bonjour Chris Oui très bien, je l'ai aussi fait avec eux et ça marche bien, vous pouvez faire le firmware jusqu'à 1700, pas la version 1800.

Ok Thank you

 

[Christof.]

I contacted the guy and he asked me for the firmware version.
Is this the RC version?
In my case it's 01.03.1800
1800 IS not good ?
Thanks

 

[Christof.]

Is it possible to roll back the RC firmware?
Thank you

 

[Agaam]

I contacted the guy and he asked me for the firmware version.
Is this the RC version?
In my case it's 01.03.1800
1800 IS not good ?
Thanks

yes the firmware of the Rc. you're better off going back to version 1400

Is it possible to roll back the RC firmware?
Thank you

you have contact via telegram? with him

 

[Christof.]

yes the firmware of the Rc. you're better off going back to version 1400

you have contact via telegram? with him

I contacted him on the site's Chat.
But I don't know how to recover and downgrade to the 1400 version, sorry.

 

[Christof.]

I contacted him on the site's Chat.
But I don't know how to recover and downgrade to the 1400 version, sorry.

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

Accept third party cookies

He gave me this link

 

[Agaam]

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

Accept third party cookies

He gave me this link

Do you also have teamviewer? and a PC? and card reader?, then I could help you remotely.

 

[Christof.]

Do you also have teamviewer? and a PC? and card reader?, then I could help you remotely.

No, Teamwiever, I don't have it and I'm not installing it, sorry.
PC yes and card reader yes.
Thanks

 

[Agaam]

No, Teamwiever, I don't have it and I'm not installing it, sorry.
PC yes and card reader yes.
Thanks

Connect the Rc to the PC, and then start the DJI program.