some guy doing an FCC hack permanent for RC pro Controller

[alxbhm]

Hey guys, tried on a other PC - and what should I say, it worked directly

Unforunately the adb connection will be closed a few seconds after the remote boots do you have the same issue?

@harryemery92 how do you get the launcher started?

best regards
alex

 

[BirdDrops]

Yeah still works the fcc hack dji fly app remains at 1.11.4

So you say , version 1.03.0700 for the DJI RC still keeps the Fly app on 1.11.4 and does not upgrade the Fly app to 1.12.3 ?

 

[harryemery92]

So you say , version 1.03.0700 for the DJI RC still keeps the Fly app on 1.11.4 and does not upgrade the Fly app to 1.12.3 ?

Yeah version 01.03.0700 still remains at 1.11.4

 

[tuxtard]

Yeah version 01.03.0700 still remains at 1.11.4

Yes

 

[dvsls]

Any ideas why the site is no longer working? I was looking to download the patch using the sincoder's provided link but it's not working anymore.

https://www.dji-fcc.com/djifcc.zip

I just saw the archive on the previous page so I would guess that is the latest one till today.

 

[herasymcuk]

Exactly

 

[BirdDrops]

Any ideas why the site is no longer working? I was looking to download the patch using the sincoder's provided link but it's not working anymore.

https://www.dji-fcc.com/djifcc.zip

I just saw the archive on the previous page so I would guess that is the latest one till today.

I updated to .0700 RC firmware yesterday .
The site was working yesterday and i compared the file dates with the one I had already downloaded and they were exactly the same . So you can just use the zipfile which has been posted before . It is the latest one .

I updated because it still keeps the dji fly software on v11 . v12 apparently introduces more limits regarding height etc. , so I do not want to jump into v12 too soon .

 

[albertino78]

Me too. Updated to 0.700. Waited 2 hours and then re patched.

 

[dvsls]

I'm doing it now. Thanks

 

[dvsls]

I did the FFC patch in July 2023 and haven't done any FW updates since. Today I went from .100 to .600 FW and the FCC patch still works.

I did what others have said:

1) Downloaded & reinstalled the patch (patch applied successfully)
2) Updated DJIRC from .100 to .600 FW.
3) Reinstalled the patch but had the error about waiting.
4) Updated the M3P whilst waiting.
5) Waited about three hours and reinstalled the patch (patch applied successfully)
6) Check radio and it is in FCC mode (the line below the 1km is about 5mm lower than when in CE mode)

So anyone with concerns, just do as I did above. Worked a charm.

I've read somewhere that after upgrading RC Firmware, you need to keep it open and apply the FCC after the cool down period. Is it like that or I can turn it off and apply the patch later?

 

[mKober]

I've read somewhere that after upgrading RC Firmware, you need to keep it open and apply the FCC after the cool down period. Is it like that or I can turn it off and apply the patch later?

You can turn it off. You don't have to wait two hours with the controller turned on.

 

[BirdDrops]

I've read somewhere that after upgrading RC Firmware, you need to keep it open and apply the FCC after the cool down period. Is it like that or I can turn it off and apply the patch later?

Better yet :
If your controller is already patched there is no need to re-apply the patch before starting a software update . And if you dont re-apply the patch before upgrading , it means you will not run into the 2 hour limitation .
Simply apply the fcc patch again after the update has finished and be done .

 

[Roadrunner1981]

I’m using this for a couple of months, Sincoder is the name. And everytime I text him he responds instantly so very good customer support hack works great, you have to reapply it everytime you update the controller but that’s it.

How much does Sincoder charge for his FCC hack please, I sent him a pm but haven't heard anything from him

 

[schip589]

Downgrade to DJI RC 01.03.0100 Possible ????
I found on the wel know google drive this tool : DJI RC 01.03.0100 Rollback Tool.
Tool Download zip - Google Drive

Someone did try this tool ??? and installing FCC ????

 

[DAFlys]

Anyone know whats new in the 1.5 version of the patch?

 

[BirdDrops]

Anyone know whats new in the 1.5 version of the patch?

Where do you see the patch version number ? (1.5 ?)

 

[DAFlys]

Where do you see the patch version number ? (1.5 ?)

It’s on the download page - DJI RC FCC 1.5 (Current) - Google Drive

 

[albertino78]

Where do you see the patch version number ? (1.5 ?)

And also on the main page DJI RC FCC | Dji Rc Fcc

 

[j8866]

How to hack Mavic 3's system to read drone's image and video data?

 

[harryemery92]

Here is the dji rc 1.03.0100 rollback tool without a password to extract