DJI Mavic, Air and Mini Drones
Friendly, Helpful & Knowledgeable Community
Join Us Now

some guy doing an FCC hack permanent for RC pro Controller

I have the DJI RC (#1). Does anybody know, how to install third party apps? Can I install the newest djifly.apk?
 
Under the new features added to this patch is:

wp filename.kmz - load DJI waypoints kmz file from sdcard then execute the mission.

Has anybody tried the above waypoint feature on the Mini 3 Pro?
 
Under the new features added to this patch is:

wp filename.kmz - load DJI waypoints kmz file from sdcard then execute the mission.

Has anybody tried the above waypoint feature on the Mini 3 Pro?
Check here :

 
  • Like
Reactions: Flashheart
It took 3 tries to get it right. First time was a reading error on my part, second time a timing error. But now I have the permanent FCC hack on the newest firmware with having it lost before due to a firmware upgrade.

And it even has a new feature. If you change your drone's name led off the LEDs on the arms of the drone will be off. No bright flashing green lights in night photos and video's!
 
Have you seen that now with the DJI RC there is the possibility of patching the firmware versions from 01.03.0400 onwards? You have to insert a microSD card into the remote control and then replace the files during installation. There is also a video guide provided by the djircfcc site. I don't have it, having purchased it directly from sincoder at the time. Does anyone have one?
 
Have you seen that now with the DJI RC there is the possibility of patching the firmware versions from 01.03.0400 onwards? You have to insert a microSD card into the remote control and then replace the files during installation. There is also a video guide provided by the djircfcc site. I don't have it, having purchased it directly from sincoder at the time. Does anyone have one?
I also have the mod from sincoder and managed to update to v01.03.0100 and re-apply the hack successfully. The question is though, is there any significant change in version 0400 or 0500? I mean, is there a reason to go through all this hassle or is it not worth it?
 
Have you seen that now with the DJI RC there is the possibility of patching the firmware versions from 01.03.0400 onwards? You have to insert a microSD card into the remote control and then replace the files during installation. There is also a video guide provided by the djircfcc site. I don't have it, having purchased it directly from sincoder at the time. Does anyone have one?

Just saw it today too .
The new djifcc is from today , right ?
Would like to see the video they are talking about too . even though my controller is already modded .
 
Last edited:
The video is in the Gdrive folder.
I watched it, but I'm not sure quite how to follow along .. might wait for someone braver to give it a go!
 
How to install the Patch on latest FW RC (.1000?) - also update the controller and then reactivate via DJIFCC? Or whats this with the SD-Card? Is this necessary when FCC is already active?
 
How to install the Patch on latest FW RC (.1000?) - also update the controller and then reactivate via DJIFCC? Or whats this with the SD-Card? Is this necessary when FCC is already active?
If you update from a previously patched version and you have ADB and FCC enabled, you don't need to do SDCard/File part of the patch. If you apply FCC patch for the first time on Firwmare 400+ then you need to do SDCard/File thing.
 
  • Like
Reactions: fischli
The video is in the Gdrive folder.
I watched it, but I'm not sure quite how to follow along .. might wait for someone braver to give it a go!
Would you be so kind as to share the folder with us? As I was telling you, many of us purchased the patch directly from its developer and, at the moment, we don't have the new material.
 
  • Like
Reactions: BirdDrops
Just saw it today too .
The new djifcc is from today , right ?
Would like to see the video they are talking about too . even though my controller is already modded .
I Spend four ours to install the new hack. the prompted message for replacing files i did not get.
Controller reboot after install, and go then useless in error, see picture below.

Will wait some time for better info how to install.
The video is strange short and a good description when and what to see is not described !
Be care so far .
 

Attachments

  • IMG_1677.jpg
    IMG_1677.jpg
    37.4 KB · Views: 35
I watched the video and followed it step by step,I did get the prompt to delete and paste the new file ,then I got to the part that says finish off in dji assistant it got to 87% then failed this happens everytime I tried the hack ,contacted dji fcc on telegram this was his reply
Actually it was successful,Failed at 87% is DJI 's bug,but I'm still in ce mode
 

Attachments

My Update stopped also at 87% - but the Firmware on Controller and Drone was on device. Afte rebooting the device the new firmware was prompted. I think it only hangs in display. I used the DJI Assistent. My Drone is now at .0700 and the DJI RC at .1000 with FCC.
 
  • Like
Reactions: Agaam and schip589
That's what I did ,after the failed update I rebooted RC ,but I'm still in CE mode I never get the message FFC patch installed successfully, I've run the patch numerous times
 

DJI Drone Deals

New Threads

Forum statistics

Threads
135,346
Messages
1,605,018
Members
163,803
Latest member
charles Chiodi
Want to Remove this Ad? Simply login or create a free account