some guy doing an FCC hack permanent for RC pro Controller

[fischli]

ask sincoder via telegram. he will help you.

 

[Richard1970]

I've been chatting to him he says it's successful as the 87%is a DJI bug

 

[fischli]

try the FCC-patch first, then update firmware!

 

[Richard1970]

I've more time tomorrow, I'm going to reset RC ,then do the hack ,if successful might update

 

[Richard1970]

Now I get error install to many times,need waiting
this was from last night and it's still saying same error now

 

[chdavgas]

ca marche !! j ai récupérer mon fcc

 

[schip589]

Now I get error install to many times,need waiting
this was from last night and it's still saying same error now

Hi Richard,
I have also no luck.
In the example video the path file is from :
Version Nov 29 2023

The path via google drive which i use is :
Version Nov 27 2023.

Perhaps ??

 

[chdavgas]

Utiliser enterprise fcc patch 1.5

 

[chdavgas]

Ma mise à jour s'est également arrêtée à 87 % - mais le micrologiciel du contrôleur et du drone était sur l'appareil. Après le redémarrage de l'appareil, le nouveau micrologiciel a été demandé. Je pense qu'il n'est accroché qu'à l'écran. J'ai utilisé le DJI Assistant. Mon drone est maintenant à .0700 et le DJI RC à .1000 avec FCC.mon

 

[chdavgas]

M drone moi .300

 

[Richard1970]

When I got the error at 87% I restated Rc ran the hack ,it does the hack again then I get to the same point 87% ,rebooted rc tried it will drone and it does work ,I never get the FCC successfull

 

[Richard1970]

Trying a different laptop ,am I doing something wrong or just unlucky

 

[schip589]

Trying a different laptop ,am I doing something wrong or just unlucky

>>>> HELP <<<<<
Where you get this patch version ( Nov 29-2023 ) i have an older one from 27 Nov 2023 !!
Got it from : Tool Download zip - Google Drive
Looks it don't work .... No FCC.

Please !

 

[Richard1970]

I got the hack here

https://www.dji-fcc.com/djifcc.zip

Still trying to get it to patch

 

[schip589]

>>>> HELP <<<<<
Where you get this patch version ( Nov 29-2023 ) i have an older one from 27 Nov 2023 !!
Got it from : Tool Download zip - Google Drive
Looks it don't work .... No FCC.

Please !

Again and Again and AGAIN No FCC.
Also bij using a other new laptop .
Ending with DJ Flij Ap Stopped in screen of the controller.
After that i Have to use FJI assistant to keep the controller running again.
I quit now for better tools.

 

[DAFlys]

Again and Again and AGAIN No FCC.
Also bij using a other new laptop .
Ending with DJ Flij Ap Stopped in screen of the controller.
After that i Have to use FJI assistant to keep the controller running again.
I quit now for better tools.

Are you copying the files from the SD card to the controller as per the instructions video?

 

[herasymcuk]

Again and Again and AGAIN No FCC.
Also bij using a other new laptop .
Ending with DJ Flij Ap Stopped in screen of the controller.
After that i Have to use FJI assistant to keep the controller running again.
I quit now for better tools.

which fw have you?

 

[schip589]

which fw have you?

Installed FW is DJI RC V01.03.1000 (Latest). NO FCC

After the first run I get the message below on the controller screen.
Then I run DJIFCC two times more.


By the specified command I copy rm330_0205 xx to SD.
By the specified command delete rm330_0205 xx in DJI RC/upgrade_center/qcom/upgrade package/part-b.
Then as fast as possible copy rm330_0205 xx from SD to : DJI RC/upgrade_center/qcom/upgrade package/part-b.

When I Push the COPY copy button the controller immediately starts to reboot / install.
Then I get the same screen again as below : DJI APP Stopped.....

Then I have to use the DJI assistant tool again, to keep the controller up and running. NO FCC
The DJI assistant tool says I have to upgrade from DJI RC V01.03.0400 to DJI RC V01.03.1000.....Again....

() Thanks for help !
Piet.

 

[Richard1970]

I get a bit further
After I have copied and pasted the new file into qcom part b it's on about 8%,it then carries on and says the program will close and carry on in dji assistant it starts at 49% and gets to 87% then fails,I reboot RC and check if FCC mode is working ,in my case No its not its still in CE mode
I never get the FCC patch successfull

 

[M1net]

Hello, I started to investigate but no luck so far.
I have an RC1 that is patched with the latest firmware.

Some links i have found:
Tools from djircfcc

Tool Download zip - Google Drive

drive.google.com

log x64dbg

log djifcc - Pastebin.com

Pastebin.com is the number one paste tool since 2002. Pastebin is a website where you can store text online for a set period of time.

pastebin.com