Strange Battery situation with my M2P

[ToddCarey]

I went to fly today, charged two batteries, but the first battery had a full charge (by the ring), yet the drone noted "The remaining battery is only engough for RTH. Return home now". On the screen the battery has an N/A. yet the battery ring is still showing a full charge. The battery has absolutely NO swelling and snaps in well into the drone. See pictures below.

Right now I have removed the props and are just running it to try to drop the battery to about 1/2 charge, and then charge it up again.

Any comments?

 

[sar104]

If you look in the DAT file I suspect that you will find a battery communication error.

 

[ToddCarey]

I will check and post the dat file once I let the battery run down a little more. Is that something that can be corrected, or is the battery dead. I have plugged it in and removed it several times....

 

[sar104]

I will check and post the dat file once I let the battery run down a little more. Is that something that can be corrected, or is the battery dead. I have plugged it in and removed it several times....

It doesn't sound promising but I would not give up on it yet.

 

[ToddCarey]

sar104 - Thanks for your assistance. Here are the two flight records from yesterday. I assume the real small log is where I started it up, but could not do anything as the drone thought the battery was dead.

 

[ToddCarey]

Oops, those were not the dat files. The flight one is to large, but this is the one with the bad battery (I think)