What do you mean by this? Are you saying the lock that is provided is defective?Dji have changed the gimbal design so the lock supplied with the drone does not fit it properly and it wobbles whilst being transported. Might have to get one from Ebay or Amazon!
any tongue involved?I give mine a big smooch before take-off for fear that I might not ever see it again.
You're not doing it right. Lay it on it's back and push the camera to the back as you put in the lock to catch the back part of the camera, be gentle.Dji have changed the gimbal design so the lock supplied with the drone does not fit it properly and it wobbles whilst being transported. Might have to get one from Ebay or Amazon!
I would also turn it on.![]()
Just calibrate the compass ONLY ONCE after arrival at Nepal, as your new location is far from last calibration location and magnetic earth environment is different.I am going on holiday to Nepal soon and am trying to compile a check list before each flight.
1. Calibrate compass
2. Remove gimbal lock
3. Make sure RTH is set
4. Get a permit to fly from Nepalese aviation authority.
What else must I do to ensure I return with good memories?
Hi... the original gimbal had a little groove behind it which slotted into the gimbal lock. The newer design on gimbal does not have that groove so the lock is useless.What do you mean by this? Are you saying the lock that is provided is defective?
Thank you! Apparently, whilst in flight the batteries should be half discharmed? So I will have to fly from 10 minutes on each battery before my flight!You might want to charge the batteries as well.
Enjoy your trip!!
Story of my life ! I will try it when I get home later. Thank youYou're not doing it right. Lay it on it's back and push the camera to the back as you put in the lock to catch the back part of the camera, be gentle.
I am going on holiday to Nepal soon and am trying to compile a check list before each flight.
1. Calibrate compass
2. Remove gimbal lock
3. Make sure RTH is set
4. Get a permit to fly from Nepalese aviation authority.
What else must I do to ensure I return with good memories?
Hi... the original gimbal had a little groove behind it which slotted into the gimbal lock. The newer design on gimbal does not have that groove so the lock is useless.
We use essential cookies to make this site work, and optional cookies to enhance your experience.