As a new Mini2 owner with a 3D printer I created multiple mounts in TPU for the Firehouse Dual Cree strobes I just bought via eBay.
They're posted on Thingiverse for anyone that is interested in printing their own.
In addition to the top/bottom mounts pictured there are mounts for the rear arms (facing rearward), front legs, and 2 variations (facing rearward and facing down) for the front arms. The arm mounts are intended for red/green pairs with the top mount using white. The bottom mount has 3mm of clearance to minimize blocking of the cooling vents.
The top mount, including the led, adds 6g and the bottom mount, with led, adds 7g. Using either alone remains under 250g total but using 2 or 3 will put the Mini2 into the >250g class.
They're posted on Thingiverse for anyone that is interested in printing their own.
In addition to the top/bottom mounts pictured there are mounts for the rear arms (facing rearward), front legs, and 2 variations (facing rearward and facing down) for the front arms. The arm mounts are intended for red/green pairs with the top mount using white. The bottom mount has 3mm of clearance to minimize blocking of the cooling vents.
The top mount, including the led, adds 6g and the bottom mount, with led, adds 7g. Using either alone remains under 250g total but using 2 or 3 will put the Mini2 into the >250g class.
