.700 vs .1000?

gtoews · Sep 26, 2017

Can anyone confirm that the latest Mavic firmware is not locked down and that I'll be able to roll back to .700 if after receiving my AC back from DJI due to a warranty claim it comes back updated?

mavic6611 · Sep 26, 2017

gtoews said:
Can anyone confirm that the latest Mavic firmware is not locked down and that I'll be able to roll back to .700 if after receiving my AC back from DJI due to a warranty claim it comes back updated?

You have to roll back to 800 then from there you roll back to 700. That's currently the only method you can use

rickw · Sep 26, 2017

I went from 1000 to 700,no problems

JMF · Sep 26, 2017

I also went from .1000 to .700, no issues.

Adamcain112 · Sep 27, 2017

JMF said:
I also went from .1000 to .700, no issues.

What version of the DJI GO app do you use?

rickw · Sep 27, 2017

I'm using 4.0.8

Adamcain112 · Sep 27, 2017

rickw said:
I'm using 4.0.8

Thanks do you ever get warnings especially the one that says you are limited to 30m

rickw · Sep 27, 2017

no,only pop up is about updating nfz,I just tap ignor

JMF · Sep 27, 2017

Adamcain112 said:
What version of the DJI GO app do you use?

4.0.8

Adamcain112 · Sep 27, 2017

JMF said:
4.0.8

I am on .700 but had the newer go app and always get 30m limit warning, i just downgraded to 4.0.3

dewster · Sep 30, 2017

.700 can be modded under the earlier version of DJI Assistant to remove No Fly Zones and altitude limitations. I couldn't hover inside of my house because I live just inside of a NFZ. I have no need to fly above 400ft.

My Mavic has flawless operation since I bought it early in 2017 under .700 I would upgrade the firmware if I could remove NFZs but each update brings potential problems.

xman1 · Oct 17, 2017

MrsTreat said:
Wow!

He speaks the truth.

jkson · Dec 7, 2017

rickw said:
I went from 1000 to 700,no problems

Hi! After this rollback, is the active track function usable?

gtoews · Dec 7, 2017

I'm curious about active track as well, I had my mavic replaced with dji care which required me to downgrade. I may be having issues with active track. I haven't done a proper test because it's always raining or dark in vancouver.

rickw · Dec 7, 2017

It should work,just haven't tried it,sorry

Qoncussion · Dec 7, 2017

jkson said:
Hi! After this rollback, is the active track function usable?

Yes ~ .0700 has the Active Track, and it works nicely.

jkson · Dec 7, 2017

Qoncussion said:
Yes ~ .0700 has the Active Track, and it works nicely.

You rolled back from 1000? It's a point.

Qoncussion · Dec 7, 2017

I never upgraded past .0700. I always wait, before upgrading, to read about any new issues. The forums lit up with FW .0800 (or, it might have been .0900) which was (at the time) a FORCED upgrade. At the same time, information about the ability to hack .0700 FW hit the web, and I locked my baby down to .0700 then and there. I've tweaked the heck out of my FW ~ so I have the drone that I paid for ~ and am not locked into playing DJI games...

jkson · Dec 7, 2017

Thank for your reply. All firmwares up to 1.04.0000 can rolled back to any previous versions. But it seems like downgrade from 1000 or 0000 causes active track issue. I'm trying to find solution. And want to know how many people have same problem AFTER rollback.