When you say losing signal what d you mean..is the drone position indicator going red or is the screen breaking up.. I have a suspicion that the cable is critical. I often get red position cases and if i "wriggle" the lead it comes good. I am getting a few new cables to try them out
He admitted in the comments that he was using a customised modified antenna on the right side.
ok i missed that point, however with a clear unobstructed line, ie over water, what range should we be able to achieve with the MA2? I would like to have at least 5-6km so i can tape the boats pounding the seas.
Based on your profile location of Bali, 5-6km may be too much to expect for CE compliant transmission levels. Unless you go with ios + fcc hack.
Hi thanx for that..just to clarify I cant get back to BAli and am currently in Sydney. I launch off my front balcony and head out. Clear LOS and this it what i get.Have tried both ipad mini 5 and ipone x same thing.
In that case it’s possible you have a defective one, but as a last check have you seen if there is a major interference at your balcony? The way it works is, 2.4Ghz can go far for CE (AUS) but easily interfered by WiFi and your neighbours, but 5.8G which is difficult to interfere has a very low output strength of only 12dBm. What I’m trying to say is Occusync 2 in CE is still prone to certain regulatory constraints.
I saw a Gentleman on YouTube the other day with a mavic Air 2 he said he noticed a difference on which side of the controller he puts his phone / tablet on. Apparently it says in the instructions it should be on the right side. he claimed that when he use it on the left side he did not get as much distance.
I’m having the same issue. 3400ft is all I have ever been able to go before total signal loss. Has anyone had any luck contacting DJI? I’m trying to decide if I should just send everything back. Very frustrating.
