Firmware Updates and Calibration

[realvue]

With my Mavic Pro 2 I used a utility app on my desktop computer for firmware updates, and to calibrate it regularly. Is there a similar app for the Mavic 3?

If there is not (I am assuming the answer is there is not) how can I customize settings on issues such as battery discharge?

 

[Starz]

Calibrate what regularly on the M2?

 

[Starz]

Is this what you’re looking for on the M3?

DJI Assistant 2 (Consumer Drones Series) - Download Center - DJI

At the DJI Download Center, learn and download DJI Assistant 2 (Consumer Drones Series)

www.dji.com

 

[realvue]

Calibrate what regularly on the M2?

Sensors. The app displays a grid on the screen and you aim the drone sensors and line everything up. Takes just a few minutes

Have you not done this?

 

[BlairAir]

DJI Assistant works the same on Mavic 3 as on previous models, assuming you need ot it is listed on Mavic 3 Downloads page:

Link:

Mavic 3 - Downloads - DJI

Download the firmware, user manual, and other materials related to DJI Mavic 3. DJI Mavic 3 is a powerful flagship camera drone equipped with a 4/3 CMOS Hasselblad camera to facilitate professional-level imaging. It also offers omnidirectional obstacle sensing for a smooth flight experience, a...

www.dji.com

 

[realvue]

Is this what you’re looking for on the M3?

DJI Assistant 2 (Consumer Drones Series) - Download Center - DJI

At the DJI Download Center, learn and download DJI Assistant 2 (Consumer Drones Series)

www.dji.com

That is the app I am talking about, yes. But when I plugged in my M3 the software did not recognize it.

 

[realvue]

Huh. Wonder if (like so many things on the M3) this didn’t work out if the box. I will try again. Reinstall if necessary. Thanks

 

[BlairAir]

Looks like a few similar posts popped up for ya, lol!

 

[Starz]

You men

Have you not done this?

Only if asked in the app.(which is very seldom)
”Regularly“ is more the question.

 

[realvue]

Looks like a few similar posts popped up for ya, lol!

Yeah sure does. I bought my M3 the night it was released and received it the same week, but I have opted to not fly until all of the firmware issues have been resolved. And I think we are at that point… I want to fly it!!!

I tried using the utility software several times when it was new, no response. Then a friend of mine found a story somewhere that said the software was being EOL’ed.

I’ll certainly post my results.

 

[RocketBrew]

The Mavic 3 using the newer Fly (cr)app use a different version of DJI Assistant 2.

DJI Assistant 2 (Consumer Drone Series)
https://www.dji.com/downloads/softwares/dji-assistant-2-consumer-drones-series

Not "DJI Assistant 2 for Mavic"

My Phantom 4 Pros frequently ask for vision sensor calibration. That does not appear to be required for the Mavic 3 (yet).

I tried using the utility software several times when it was new, no response. Then a friend of mine found a story somewhere that said the software was being EOL’ed.