Mavic pro abnormal gimbal vibration with gimbal motor overload errors. Ribbon cable has been replaced, gimbal calibrates correctly but I still get the abnormal vibration. Seems to happen every 10 to 17 seconds. See video, how do I fix this? The video is of drone turned on only, just sitting.Gimbal vibration
This drone has never been crashed, it was transported several times without gimbal lock.
The cover is off in video because I just changed ribbon cable, same issue, have not had the overload error since ribbon change.
It’s really odd that it happens ever 17 seconds(about), it is random but constant.
Gimbal works correctly when it’s not vibrating.
When vibrating tilt motor gets hot. If you hold the tilt arm while vibrating it seems to stop quicker.
Thank you to all.
Seriously frustrated!
This drone has never been crashed, it was transported several times without gimbal lock.
The cover is off in video because I just changed ribbon cable, same issue, have not had the overload error since ribbon change.
It’s really odd that it happens ever 17 seconds(about), it is random but constant.
Gimbal works correctly when it’s not vibrating.
When vibrating tilt motor gets hot. If you hold the tilt arm while vibrating it seems to stop quicker.
Thank you to all.
Seriously frustrated!
Last edited: