DJI Mavic, Air and Mini Drones
Friendly, Helpful & Knowledgeable Community
Join Us Now

Neo with RC-2 and Goggles 3

NZBob

Well-Known Member
Premium Pilot
Joined
Nov 29, 2024
Messages
49
Reactions
60
Location
New Zealand
Sorry if this has been discussed, I couldn't find it if it has been. Is it possible to fly a Neo with the RC-2 while using the Goggles 3? I know that the RC-2 flies the Neo, I know that the Goggles 3 work with the Neo, but what about all three?
Reason:
I want to buy a Neo and try FPV
I own an RC-2 already, so if it works...

Otherwise, I guess I buy a new controller.

Thanks
Bob
 
Good question. I don't know that RC-2 can pair with Goggles 3 so that might be the issue.

It's easy enough to get MC-3 if it doesn't work out.
 
With the RC-2, it seems to change firmware when you switch to the Neo (watching a Youtube), I assume that it changes back when you switch back to the Air 3s. Do you need an internet connection to do this? This would be awkward out in the field... Is it better really to have a separate controller for each aircraft, so it just works?
 
With the RC-2, it seems to change firmware when you switch to the Neo (watching a Youtube), I assume that it changes back when you switch back to the Air 3s. Do you need an internet connection to do this? This would be awkward out in the field... Is it better really to have a separate controller for each aircraft, so it just works?
When you are using a single controller to switch between different compatible drones, you don't need an internet connection.
 
I want to buy a Neo and try FPV
1. Get an RC-3
2. Get a simulator. (liftoff or VelociDrone, etc) Plug in the RC-3 and practice.
3. Try your newly acquired sim skills outdoors slowly, With the NEO.
4. Get addicted and start the spending spree!
 
1. Get an RC-3
2. Get a simulator. (liftoff or VelociDrone, etc) Plug in the RC-3 and practice.
3. Try your newly acquired sim skills outdoors slowly, With the NEO.
4. Get addicted and start the spending spree!
Thanks, yes, I hear that a lot!
It is a pity that they bundle both the Neo and the Avata with the motion controller rather than the RC-3, everyone seems to say that are much better, and I am used to flying with sticks.

What about the Goggles N3? Although you can buy the Goggles 3 separately, it seems that if I ever wanted an Avata, it would come with the goggles 3, so if I knew for sure that I wanted to do this, I would be better off buying the Avata 2 now to get the Goggles 3 to fly the Neo! (as someone else said, the Neo makes a great Avata accessory!). The Neo here is sold bare, or in a combo with the Goggles N3.
 
Depending on the Type of FPV you start with, I would have to say the Avata 2 is better in a few ways.
You don't want to full on race, rip or Bando with a DJI drone tho But as long as you don't slam it full speed into a wall or tree an Avata2 will do fine! I have not flown the Neo but I have seen videos and while its smaller so you can FPV in more places its got a high price tag in my opinion. Then Agian, thats the thing with DJI built Drones and FPV, They are very pricey no matter the one you choose for a large number of reasons. and once you really start FPVing you will see they have a huge disadvatage in several ways.

I would buy the goggles three over the cheaper ones hands down! But really its up to you. Once you become addicted you will be looking at Drones made by other Manufacturers. IF you stick to getting Drones made with the DJI Air units The goggles and controller you buy will work for them all!
Most of us use the DJI air units but we put Different receivers than the DJIs. For instance, I use my DJI googles for my Video, BUT for my Receiver I am a ELRS Fanboy lol. I use a RadioMaster Zorro controller with ELRS and use my DJI goggles.
 
Last edited:
  • Like
Reactions: NZBob
Depending on the Type of FPV you start with, I would have to say the Avata 2 is better in a few ways.
You don't want to full on race, rip or Bando with a DJI drone tho But as long as you don't slam it full speed into a wall or tree an Avata2 will do fine! I have not flown the Neo but I have seen videos and while its smaller so you can FPV in more places its got a high price tag in my opinion. Then Again, thats the thing with DJI built Drones and FPV, They are very pricey no matter the one you choose for a large number of reasons. and once you really start FPVing you will see they have a huge disadvatage in several ways.

I would buy the goggles three over the cheaper ones hands down! But really its up to you. Once you become addicted you will be looking at Drones made by other Manufacturers. IF you stick to getting Drones made with the DJI Air units The goggles and controller you buy will work for them all!
Most of us use the DJI air units but we put Different receivers than the DJIs. For instance, I use my DJI googles for my Video, BUT for my Receiver I am a ELRS Fanboy lol. I use a RadioMaster Zorro controller with ELRS and use my DJI goggles.
Thanks, it is great to know that they are so versatile. Nope, I will not be racing. I have watched a few videos and I most certainly do not have the reflexes any more, if I ever did, and now I am old. I would just enjoy the FP scenic views. I am loving the Air 3s, but having something smaller, a little more robust, to fly though the trees etc would be lots of fun. I don't understand why the Goggles 3 are compatible with the Air 3 and the MP4, but not the Air 3s... that seems weird. Do you think that it will come with an update, or are they going to release yet another pair of Goggles that ARE compatible?
 
  • Like
Reactions: Cafguy
I think it was an early sales ploy thing for the drone itself and I think it would be made compatible in future firmware updates.
For what you are wanting to do I would strongly advise you to skip the NEO and get the AVATA 2 you will be happier about it in the long run!
 
I think it was an early sales ploy thing for the drone itself and I think it would be made compatible in future firmware updates.
For what you are wanting to do I would strongly advise you to skip the NEO and get the AVATA 2 you will be happier about it in the long run!
Thanks. It does seem to be the only sensible way to buy the Goggles 3, and the camera on the Avata 2 does get much better reviews. I am very pleased that I bought the Air 3s rather than the MP4, because of the windy conditions that I encounter, I would imagine that the Avata 2 would be similar... cry once, as they say... (and there are no weight restrictions in NZ).
 
The NEO is kind of targeted at beginner FPV'ers. The thing is the NEO is basically a whoop Drone and anyone who rips tiny whoops will tell you, Those little motors have a pretty short life. All of my Tiny whoops go thru motors almost like Batteries and the thing is, I dont see any ads from DJI showing packages of replacement motors! If you get a NEO and do nothing but fly it FPV style, ripping around the neighborhood, You will be (sooner than you think) looking for new motors to put in it. My 2 cents.
 
  • Like
Reactions: NZBob
Thanks!
It does make sense. New controller needed then.

In this case it's a technical limitation... the goggles 3 handle all communication with the drone. The FPV RC3 and MC3 connect to the goggles 3, not the drone. The RC2 can't do this.
 
  • Like
Reactions: Cafguy and NZBob
The NEO is kind of targeted at beginner FPV'ers. The thing is the NEO is basically a whoop Drone and anyone who rips tiny whoops will tell you, Those little motors have a pretty short life. All of my Tiny whoops go thru motors almost like Batteries and the thing is, I dont see any ads from DJI showing packages of replacement motors! If you get a NEO and do nothing but fly it FPV style, ripping around the neighborhood, You will be (sooner than you think) looking for new motors to put in it. My 2 cents.
It does not look like it would be easy to replace the motors on the Neo, how possible is this? What about the Avata, do the motors last long on it? Are they easy to replace? What sort of cost to replacing motors? This is something that I had not ever considered.

I assume that the motors on the Air 3s have a much easier life and wouldn't usually need replacing?
 
  • Like
Reactions: Cafguy
The avata motors are in a large enough class of motor that you will rarely need to replace it. if ever. Its the tiny motors that seem to start going funny after about 100 hrs.
Motor replacements are very simple on whoops and even easier on non DJI FPV Drones.
This is an expensive hobby! My tinywhoop motors cost me about 10 bucks apiece. When and if you really get into the hobby full steam, You can end up spending a ridiculous amount of money.
 
  • Like
Reactions: NZBob
The avata motors are in a large enough class of motor that you will rarely need to replace it. if ever. Its the tiny motors that seem to start going funny after about 100 hrs.
Motor replacements are very simple on whoops and even easier on non DJI FPV Drones.
This is an expensive hobby! My tinywhoop motors cost me about 10 bucks apiece. When and if you really get into the hobby full steam, You can end up spending a ridiculous amount of money.
I don't drink or smoke so I need something to spend money on ;-)
 
On a different topic, should I fit a screen protector on the RC-2? They gave me a SunnyLife kit with two pieces of tempered glass and cleaning kits as part of the Black Friday combo, but I have not fitted one. I have never used them on my phones and I have one of those case/sun hood things that completely covers the sticks and screen when closed, so the screen is well protected when it is not in use (and I never need to remove the sticks!).

I have them, should I fit one? They obviously give a little extra protection from knocks etc, but do they also have any disadvantages? One I tried on a phone many years ago made the screen less sensitive to touch and I hated it. I am always very careful with my stuff.
 
  • Like
Reactions: GadgetGuy
On a different topic, should I fit a screen protector on the RC-2? They gave me a SunnyLife kit with two pieces of tempered glass and cleaning kits as part of the Black Friday combo, but I have not fitted one. I have never used them on my phones and I have one of those case/sun hood things that completely covers the sticks and screen when closed, so the screen is well protected when it is not in use (and I never need to remove the sticks!).

I have them, should I fit one? They obviously give a little extra protection from knocks etc, but do they also have any disadvantages? One I tried on a phone many years ago made the screen less sensitive to touch and I hated it. I am always very careful with my stuff.
The screen is insensitive enough. without making it worse with a clear screen protector. You are good!
 
  • Like
Reactions: NZBob and Cafguy

DJI Drone Deals

New Threads

Members online

Forum statistics

Threads
135,848
Messages
1,610,779
Members
164,342
Latest member
maris2cul
Want to Remove this Ad? Simply login or create a free account