Not happy with the shimmering on this video?

[drumbum]

Hey all,

I have been filming using the mavic as follows and have provided a sample link:

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

Accept third party cookies

I am trying to move to the next level and get better, smoother video however I dont know what the shimmering is in this video example. Its most obvious around the goal nets/fence/roofline.

Its 1080p, 60fps with an ND4 filter shot dlog with LUT added.

Any guidance would be greatly appreciated.

 

[Kilrah]

Don't use framerates >30fps.

 

[Flycaster]

It's called the "Moire pattern"....

 

[skiguy1701]

This is a known issue with the Mavic. 60fps is simply not usable. A YouTube search will show a lot of similar examples. This issue is not fixable in firmware. It is a limitation of the chipset used by the Mavic.

Jim

 

[Mr. Salty]

That's called aliasing, and it's a known weakness of the Mavic's camera when shooting in 1080p at 60 fps. Supposedly the camera on the Mavic Pro Platinum has changed some hardware to correct for this, but I haven't read any actual reviews yet. Of course that would also require buying a new drone.

In short, about your only option is not to shoot in 1080p at 60 fps.

 

[Pathogen]

if you have sharpness above 0, you are disabling the noise reduction that tries to reduce this artifacting among other things.

 

[Oingo Boingo]

Just shook 4K.... Way better quality

 

[SeaComms]

I get that same effect after editing when the compression is set to high

 

[gnirtS]

Its moire but theres also some of the standard inter-frame flicker there as well. 4k would help a bit, 2.7k would help a bit more but there is always going to be some flickering on detailed areas purely due to the low bitrates the mavic uses for video.

 

[drumbum]

Thanks very much for the info, very helpful.