Again, the drone went bonkers with the magnetic adapter part that I inserted into the Remote Controller. Several month back when I INSERTED the part into the RC the Mavic 2 acted out by loosing connection when the drone was 100, 200 feet away from controller. (Keep in mind, I had ZERO issues with the Mavic at that time) I had 1 incident a few weeks back when the drone ascended on it's own when in Pano mode. ( I posted about that incident) NOW, last night I decided to try that adapter part again by inserting it into the RC and the drone acted bonkers right away. As soon I initiated a auto take off the drone started these jerking motion while hovering and then I pushed the right stick forward (Mode 2) and the drone went forward and when I let the stick go the drone kept going forward so I panicked I pulled left stick down and nothing happened so panicking more I push left stick up the drone started going up and I let the stick go the drone kept going up so then I hit the cancel button the drone stopped and went into a hover. I then pulled left stick down and the drown went down to a landing...WOW, my hearted pumping I feet light and weird. So I then retrieved the drone took out that adapter from remote and tried drone again. The drone flew perfectly fine as nothing was wrong with it...........I am now convinced that magnetic adapter affects my drone... Maybe other have no issues with it but my drone does.....NO MORE USING IT. . .