pairing m2P to pro contorller

[Pyrate]

Newbie here, i have to pair my pro Controller to my drone (M2P) every time. you would think it would remember it??? have I missed something somewhere????

 

[Deleted member 103366]

Just for clarity, what do you mean by "pro Controller", can you give the model number?

 

[DanMan32]

By "Pro controller" I hope you mean the remote that comes with the M2 series models. M2 uses Occusync 2 whereas the M1 remote is Occusync 1 and not compatible.

The M2 can only bind with 1 remote at a time, two if you specify the 2nd as a secondary/slave, and the remote can only bind to one M2 at a time.

If you have only one M2 AC and one M2 remote and they aren't holding a binding, you can try refreshing the firmware on both. However it's rare the binding doesn't hold so if firmware update/refresh doesn't work, you'll need a repair of either one or both.

 

[Pyrate]

I have the Mavric 2 Pro, also the Pro controller that has the screen built in. The controller doesn't seem to remember the Drone so I need to pair it.

 

[THE CYBORG]

Take a look at page 47 of the manual, hope it helps.
Download Mavic 2 manual HERE

 

[Pyrate]

Just for clarity, what do you mean by "pro Controller", can you give the model number?

i guess it is a smart controller RM500

 

[THE CYBORG]

i guess it is a smart controller RM500

Process should be the same

 

[DanMan32]

Do you lose pairing with SC if you subsequently use the standard stock controller as master?

SC may need a firmware refresh or update.

SC = Smart Controller - Controller with integrated Android.
"Screen" was not much of a clue that you were referring to the SC since the standard stock remote for both the M1 and M2 have a small LCD screen for basic telemetry and other info. Very useful when the app fails.

 

[lannes]

Check to see if the Smart Controller needs a firmware upgrade

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

Accept third party cookies

Then follow the linking process

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

Accept third party cookies

 

[Pyrate]

Do you lose pairing with SC if you subsequently use the standard stock controller as master?

SC may need a firmware refresh or update.

SC = Smart Controller - Controller with integrated Android.
"Screen" was not much of a clue that you were referring to the SC since the standard stock remote for both the M1 and M2 have a small LCD screen for basic telemetry and other info. Very useful when the app fails.

I only have the one control.