Props changed to Master Air Screw

[360 Guy]

I purchased "stealth" props fro Master Air Screw.
Should I use the prop screws supplied with the new props or use the original screws?
If yes or no, please explain why or why not before I change them out.
TIA

 

[Phantomrain.org]

You can use whatever does not fall on the floor and get lost, there both good to use , lol
I would use all 4 the same if possible .

Phantomrain.org
Gear to fly the Mini 2 in the Rain and Land on the Water.

 

[MAvic_South_Oz]

I would have thought if screws are supplied with props (both OEM DJI props, and other brands like MAS) then you should (might as well) use the new ones, along with the blue loctite of course.

I did find this thread just now on the DJI forum . . .

Propellers screws replacement

I read somewhere that even if we dont replace the propellers, if we unscrew the screws we have to replace them with new ones. Is that correct? Manual and video instructions does not clarify it properly "It doesn’t matter if you replace the props or not. Once you remove the screws new screws...

forum.dji.com

 

[McGanksta]

While I dont have the MAS props, I think I read somewhere here that the OG prop screws did not work, and the ones supplies with the MAS props are needed....

I can not find the thread, but will keep looking

McG

Master Airscrew... props for Mini2.. comments? thoughts?

I hear all good things about these... thought folks? Thanks in advance JG

mavicpilots.com

 

[360 Guy]

I do have blue Loctite, but is it really necessary if I'm sure that the screws are tight?

Just ask'in

 

[360 Guy]

Thanks for the replies so far.

 

[McGanksta]

i have considered getting them for the colors alone, trying to make my BabyBird more flamboyant, but the last few threads I have read about them had poor comments about the fit/finish of the MAS props

McG

 

[360 Guy]

Well Mr. McGanksta, I am now installing the stealth props so I follow up with my findings.
So far the props look good, no burrs that I have heard some say were on the Air 2 props and that sir was not proven to me..
Don't go by hearsay.
Ill be back, like I said, with a truthful follow-up. Stay tuned!

 

[Phantomrain.org]

Well Mr. McGanksta, I am now installing the stealth props so I follow up with my findings.
So far the props look good, no burrs that I have heard some say were on the Air 2 props and that sir was not proven to me..
Don't go by hearsay.
Ill be back, like I said, with a truthful follow-up. Stay tuned!

Look forward to hearing the Review for the Mini 2 MS props , if you can download the free DB sound level and get a number for me at 3 ft as i am still waiting for mine.

Phantomrain.org
Gear to fly your Mini 2 in the Rain.

 

[MROJAS]

I do have blue Loctite, but is it really necessary if I'm sure that the screws are tight?

Just ask'in

Loctite is a means to secure the screw threads. They may be tight whan installed but the Loctite will prevent them from loosing up due to vibrations.

 

[fgurnee01]

Master Airscrew props come with new screw with loctite installed on the threads. If it’s good enough for them, it sort of settles the question.

 

[BuschPilot]

I have heard that using clear finger nail polish, works well as a locktite, for these little screws.... I have read it somewhere, I haven't tried it, maybe someone here in the forum knows more about it.... but its just a thought...