RID

[ScheisseKopf]

Installed the latest update this morning for my Mavic Air 2. Where within the settings do I see that
I am broadcasting RID? Doesn't look like anything changed except the update.

 

[MA2 317]

There's another thread about this.

I didn't have any luck either but other members have.

Mavic Air 2 RID firmware update available today

Firmware v01.01.1600 was released today for the Mavic Air 2. It adds RID to the AC. I have updated mine and the update went fine.

mavicpilots.com

,

 

[mobilehomer]

Fly/go fly/settings/about/Serial number(SN)

 

[maggior]

On the about screen in DJI Fly you'll see "Remote ID SN". That's the id that is broadcast. It's also what you need to register with the FAA. It is the aircraft serial number with "1581F" prepended and "0" appended.

 

[MA2 317]

On the about screen in DJI Fly you'll see "Remote ID SN". That's the id that is broadcast. It's also what you need to register with the FAA. It is the aircraft serial number with "1581F" prepended and "0" appended.

Yep.

All twenty digits.

 

[ScheisseKopf]

On the about screen in DJI Fly you'll see "Remote ID SN". That's the id that is broadcast. It's also what you need to register with the FAA. It is the aircraft serial number with "1581F" prepended and "0" appended.

Sorry, not there.

 

[MA2 317]

Sorry, not there.

That's what happened to me yesterday. Updated to the new firmware and nothing there.

I turned everything off and tried again a couple hours later.

This time I got the message that the FLY app needed an upgrade although it didn't prompt me the first time I tried.

After updating the FLY app and signing back in to my DJI account, the RID showed up in the menu and it was broadcasting after the props spin up. Took less than ten seconds to show up in the Scanner app and showed my status as grounded since I didn't launch and fly.

.

 

[ScheisseKopf]

Everything is up to date including the Fly app. It's been over 24 hours
since the firmware was updated that contained RID. It's been on and off many times
and nothing has changed.

 

[JP_CACIKE]

There's another thread about this.

I didn't have any luck either but other members have.

Mavic Air 2 RID firmware update available today

Firmware v01.01.1600 was released today for the Mavic Air 2. It adds RID to the AC. I have updated mine and the update went fine.

mavicpilots.com

,

Finally! just downloaded my RID update although it's not showing up yet on the FAA Compliance site