Silencing low battery beep

[cagliostro]

Can anyone jog my memory please on how to silence the low battery tone please?? I know it came out on an update recently, but I forgot what it was.. Thanks in advance !

 

[marc5]

I think hitting the power button silences it.

 

[cagliostro]

I think hitting the power button silences it.

Thanks for the reply, I did try that but it didn't work, that's what caused all my doubt.. The drone is updated etc....

 

[rockydog]

I think you'll find silencing the beep is only for the controller battery, not the drone.

 

[Flawless]

I think you'll find silencing the beep is only for the controller battery, not the drone.

Yep.

You can modify the threshold for low battery warning if you intend to regularly fly below 30%, but aside from landing the drone there's no way to mute the noise.

 

[cagliostro]

Yep.

You can modify the threshold for low battery warning if you intend to regularly fly below 30%, but aside from landing the drone there's no way to mute the noise.

Ok thanks! Could of swore I seen on an update by pressing the power button it muted it? No worries thanks for your help!

 

[Flawless]

Ok thanks! Could of swore I seen on an update by pressing the power button it muted it? No worries thanks for your help!

The update allowed you to silence the warning of the controller's battery getting low.

 

[cagliostro]

The update allowed you to silence the warning of the controller's battery getting low.

Do you know how to silence the controller please?

 

[Slayerstwin]

Do you know how to silence the controller please?

There isn't any way unless you take the controller apart

 

[rockydog]

Do you know how to silence the controller please?

Mavic Pro Release Notes

Date :
Firmware :
DJI GO 4 App iOS :
DJI GO 4 App Android :

What’s New?

2017.04.11 v01.03.0600 v4.0.7 v4.0.6

•  Added Fixed-Wing mode. For details about Fixed-Wing mode, please refer to the Intelligent Flight Mode section in user manual v1.6.
  
  
•  Added an option to turn off the remote controller low battery level warning. When battery level is less than 15%, just press the power button on the remote controller to turn off the warning.
  

 

[rockydog]

There isn't any way unless you take the controller apart

Incorrect...see post #10 above.

 

[cagliostro]

Problem solved thanks very much guys for all your help and input!!

 

[Flawless]

Incorrect...see post #10 above.

That mutes the alert about controller battery, not Mavic battery.

 

[cagliostro]

That's right, I described it wrong from the start (my fault). Thanks anyway for helping, sorry for not describing correctly! [emoji1303]