some guy doing an FCC hack permanent for RC pro Controller

pyrolator · Sep 7, 2023

Darkabaz said:
Which version patch did you downloaded?

Dload the latest FCC 1.4 patch

Darkabaz · Sep 7, 2023

Do you have a link or something? And need to run that patch on RC Pro
On v 0100 and than on 0500?

pyrolator · Sep 7, 2023

some guy doing an FCC hack permanent for RC pro Controller

Yo You must remove the Dji fly application, then reinstall it, then patch it. I did it on more than one device You can message me on Telegram @h5020 You are Uncontactable

mavicpilots.com

Here in this post is the link.
Don't forget to paste your serial in the folder.

Darkabaz · Sep 7, 2023

pyrolator said:
some guy doing an FCC hack permanent for RC pro Controller

Yo You must remove the Dji fly application, then reinstall it, then patch it. I did it on more than one device You can message me on Telegram @h5020 You are Uncontactable

mavicpilots.com

Here in this post is the link.
Don't forget to paste your serial in the folder.

Serial have to buy? It is also for rc pro right?

pyrolator · Sep 7, 2023

Darkabaz said:
Serial have to buy? It is also for rc pro right?

Buy the patch from an guy called sincoder.
Not the drone hacks tool

fischli · Sep 7, 2023

So FCC is working with FW 1.03.0500 for me. Update was easy but annoying. I installed the DJIFCC.exe first on 1.03.400 again to get sure - and than I had to wait and wait ("you installed too much times..."). But however, it's working and now with Flyapp 1.11.4

Darkabaz · Sep 7, 2023

Can you control auxiliary light with the fcc mod?

fischli · Sep 7, 2023

I did not checked. With 1.03.0100 it worked for me.

Darkabaz · Sep 7, 2023

Could you guys check if aux.light control is still there? Got a fcc mod but that LED button is actually gone.

bvansteyn · Sep 7, 2023

fischli said:
So FCC is working with FW 1.03.0500 for me. Update was easy but annoying. I installed the DJIFCC.exe first on 1.03.400 again to get sure - and than I had to wait and wait ("you installed too much times..."). But however, it's working and now with Flyapp 1.11.4

Great! So you came across the cooldown period. Nice to see it working.

fischli · Sep 8, 2023

Ah this is meant with "cooldown period". Well Sincoder have a build in wait-time when you are installing too much the patch. But on first install (.100 FW) I had about 3-4 times the chance. Now only 1 time and then you have to wait. It's a little bit annoying and takes about 2 hours to wait.
But I wanted to be sure, so I installed the patch again under .400 right before the update. Probably unnecessary, but better that way than losing FCC.

herasymcuk · Sep 8, 2023

pyrolator said:
some guy doing an FCC hack permanent for RC pro Controller

Yo You must remove the Dji fly application, then reinstall it, then patch it. I did it on more than one device You can message me on Telegram @h5020 You are Uncontactable

mavicpilots.com

Here in this post is the link.
Don't forget to paste your serial in the folder.

If you have run the fcc patch at least once, the serial is already on their servers. The patch itself checks this during execution. There is no need to copy the SN into a folder.

GravityRZ · Sep 8, 2023

what are the advantages when running 0500 on a mini 3 pro
i believe the biggest advantages are for the air 3 where you can get a screen which shows the view through the proximity sensors
this is not available on the mini 3 pro right?

DAFlys · Sep 8, 2023

GravityRZ said:
what are the advantages when running 0500 on a mini 3 pro
i believe the biggest advantages are for the air 3 where you can get a screen which shows the view through the proximity sensors
this is not available on the mini 3 pro right?

That’s the Mavic 3 not air 3. For mini 3 you get new voices and frame guides with this update and maybe some squashed bugs

GravityRZ · Sep 8, 2023

DAFlys said:
That’s the Mavic 3 not air 3. For mini 3 you get new voices and frame guides with this update and maybe some squashed bugs

ok. thans

to bad they did not impleent things like drone shadow and home point visible and homepioint route.
thouse would have been usefull. i do not see why they could not include those bacause hardware should support it

DAFlys · Sep 8, 2023

GravityRZ said:
ok. thans

to bad they did not impleent things like drone shadow and home point visible and homepioint route.
thouse would have been usefull. i do not see why they could not include those bacause hardware should support it

Absolutely. Home point would have been really nice

pyrolator · Sep 9, 2023

GravityRZ said:
ok. thans

to bad they did not impleent things like drone shadow and home point visible and homepioint route.
thouse would have been usefull. i do not see why they could not include those bacause hardware should support it

i think the answer is:
MARKETING - to push the new Drones.
Why should i buy a new Drone when my M3P get all the new Stuff like drone shadow / homepoint route ?

But now: back to Topic.

Sir Maxwell Greene · Sep 9, 2023

Hatem said:
1 - FCC is registered on version 01.03.0100

2-Restart DJI rc three times

3- Make sure to open adb by installing a third-party application or enter the Vysor website if the screen is mirrored on the computer as evidence of opening adb.

4-Update to the latest version

5-Make the FCC patch

And that's it

It is possible to contact Telegram @h5020

With the Controller being updated to the latest and the FCC patch working....can i safely update the aircraft firmware as well with no issue?

pyrolator · Sep 9, 2023

Sir Maxwell Greene said:
With the Controller being updated to the latest and the FCC patch working....can i safely update the aircraft firmware as well with no issue?

I think so, the patch is done on the RC side.
Not in the aircraft , as far as i know.

Sir Maxwell Greene · Sep 9, 2023

pyrolator said:
I think so, the patch is done on the RC side.
Not in the aircraft , as far as i know.

yep thats what i think too, just want to be clear before i hit the update... I have not updated in a looooong time and cant afford any mishaps. Too reckless for my own good lol