some guy doing an FCC hack permanent for RC pro Controller
- Thread starter Scoobychief
- Start date
I finaly manage to pay and got pass code for hack. Installed on my DJI RC which was on .200 fw. Tested flight in city and WOW how much better range it is now.
After test I updated my controler to .500 fw as I ask that guy on Telegram and he told me it is safe to do. Just not sure if I have to install hack again or it is active allready after upgrade? When I visit transmision page it has 90db below 1km and above 4km. Is it sign that hack is active?
After test I updated my controler to .500 fw as I ask that guy on Telegram and he told me it is safe to do. Just not sure if I have to install hack again or it is active allready after upgrade? When I visit transmision page it has 90db below 1km and above 4km. Is it sign that hack is active?
pyrolator
Well-Known Member
- Joined
- Apr 13, 2018
- Messages
- 140
- Reactions
- 63
- Age
- 62
In this thread are some pictures of FCC mode in the transmition page of the RC.
Simply look some post before your question.
I did but I thought that there are much more differenc in graph between CE vs FCC, so I couldnt figure it out..
This image is imediatly afer I updated to .500. And it looked to me like it is in FCC, but I think this is CE as 1km i 4km are much closer.
But I decided to patch one more time, just in case and after I did it graph looks like this now and probably this is FCC and previous picture CE
So I would apprechiate if someone could confirm that second picture is FCC. Tnx.
Im guessing he's using ADB to remove and reinstall the new android APK file from the DJI download centre. Although I think Id use adbcontrol to make life a bit easier and install the Samsung S9 launcher so that the controller cant get stuck on the device starting screen.
Rockowe
Well-Known Member
- Joined
- Dec 19, 2017
- Messages
- 499
- Reactions
- 415
- Age
- 53
My DJI-RC - Had the HACK -
It was installed about 2 Months Back.
Since then I believe the Hack was Upgraded - but I didnt Reinstall it as I already had the HACK !
Then - my COntroller did an Auto UPDATE straight to 0500
The Hack was Gone....
When I tried to Reinstall with the Old Hack Software-...
...It Gave an Error message that It could not wort on this Firmware. only 0100
I downloaded the Latest Paid Hack tool - Overwrote the Software on my PC ... and tried again
NO LUCK !!
...
I cantoct the Guy who sold me the $69 hack...
He said there was NO WAY to FIX this ....
Im Very bummed out about this - ... as my flying experience on the DJI-RC - just plummeted.
Has ANYONE found a Way around this ...
To Do the Hack again on a 0500 that seems bricked from getting the hack ?
It was installed about 2 Months Back.
Since then I believe the Hack was Upgraded - but I didnt Reinstall it as I already had the HACK !
Then - my COntroller did an Auto UPDATE straight to 0500
The Hack was Gone....
When I tried to Reinstall with the Old Hack Software-...
...It Gave an Error message that It could not wort on this Firmware. only 0100
I downloaded the Latest Paid Hack tool - Overwrote the Software on my PC ... and tried again
NO LUCK !!
...
I cantoct the Guy who sold me the $69 hack...
He said there was NO WAY to FIX this ....
Im Very bummed out about this - ... as my flying experience on the DJI-RC - just plummeted.
Has ANYONE found a Way around this ...
To Do the Hack again on a 0500 that seems bricked from getting the hack ?
Sadly all you can do is hope a new update comes, My guess is he’s waiting for the next firmware for rc2 when mini 4 launches so that he can sell to a new audience abd DJI don’t shut it down too early.
I don't think that guy is slacking, but rather that DJI implemented some new mechanisms to prevent hacking. DJI software development was sloppy in the beginning, but now they are investing a lot of time and effort to prevent reverse engineering and hacking.
try doing a firmware refresh using dji assistant. then download the latest fcc patch from the site http://dji-fcc.com/djifcc.zip connect the remote control, open dji assistant and search for new firmware, close dji assistant and run the patch as administrator (1,2, even 3 times )
Rockowe
Well-Known Member
- Joined
- Dec 19, 2017
- Messages
- 499
- Reactions
- 415
- Age
- 53
As you can see I did all the ABove suggestions
As you can See in my post I did all the above Suggestions.
The FCC .exe App Kept on replying that 0100 was the Highest Dji-RC firmware to Patch
Also the Lowest Dji Assitant will allow is Firmware .0400
As you can See in my post I did all the above Suggestions.
The FCC .exe App Kept on replying that 0100 was the Highest Dji-RC firmware to Patch
Also the Lowest Dji Assitant will allow is Firmware .0400
I have now read your first post more carefully. I see you didn't reinstall the patch before upgrading. So it makes me think that the fcc mod you installed two months ago was the old version.
Rockowe
Well-Known Member
- Joined
- Dec 19, 2017
- Messages
- 499
- Reactions
- 415
- Age
- 53
Quite correct...
And using the old version on .0500. Broke the hack
Even when I tried using the new hack afterwards... but then it was too late... I couldn't roll hack the firmware back to 0100 once having installed 0500.
So unless I find a way to roll back... I lost the $69 and the hack
Rockowe
Well-Known Member
- Joined
- Dec 19, 2017
- Messages
- 499
- Reactions
- 415
- Age
- 53
Yep I did that too.
He was the one who told me.
"there's nothing you can do.... either change controller or wait for a fix"
so that's that
Hallo. I have the same problem with the .0500 . Sincoder told me two days ago, "maybe" he will have a fix for this problem. I am waiting ...
Similar threads
