some guy doing an FCC hack permanent for RC pro Controller
- Thread starter Scoobychief
- Start date
They not reply to my message..
DJI RC FCC | Dji Rc Fcc
FCC for DJI RC and RC Pro, Mini 3 Pro and Mavic 3! The DJI RC FCC tool allows you to unlock the full transmission power of your drone, go further and have better signal, even if you are in Europe CE mode!www.djircfcc.com
Does anyone have the telegram contact of these developers?
Rimzler does respond, he takes his time but he does.
And what is your question after all? The service works.
And what is your question after all? The service works.
Mail, contact form on website.
WHAT IS THE QUESTION BRO, he‘s not responding to irrelevant stuff FIY
He replied to me today
Hi! Nice to meet you!
DJI RC, Rc pro, Rm500, Rm510b, Rm700 compatible with all updates
Rc 2 Compatible with 02.00.0100 max for now, can be updated to latest version once FCC is installed
Also unlocks 500m
Other commands available in instructions
Does not unlock NFZ
Have you read the instructions carefully?
DJI RC FCC | Dji Rc Fcc
Always use the website as reference for latest info about compatibility, not checking may result in the FCC not working anymore, no refunds will be issued
You need to make a donation
69 USDT for consumer radios
120 USDT for enterprise (Rm510b, RM700)
USDT Trc20 address
TPSj9VQFZRWBbgXXE3Xoj7xNzhDMFVPeDv
If you cannot use crypto let me know, what about PayPal?
PayPal (Friends and Family) Pay Andrea Zega using PayPal.Me
Once this is done send a screen or txid and you will receive the Google drive link!
Due to high demand it can take between 1h to 24h before you receive your package
Once the mod is installed it will be permanent until you update/ reset the radio, before doing so always check the website to make sure server is online and new firmware versions are compatible.
If you don't check you run the risk of losing your mod, and no refunds will be issued, thanks for understanding!
Hi! Nice to meet you!
DJI RC, Rc pro, Rm500, Rm510b, Rm700 compatible with all updates
Rc 2 Compatible with 02.00.0100 max for now, can be updated to latest version once FCC is installed
Also unlocks 500m
Other commands available in instructions
Does not unlock NFZ
Have you read the instructions carefully?
DJI RC FCC | Dji Rc Fcc
Always use the website as reference for latest info about compatibility, not checking may result in the FCC not working anymore, no refunds will be issued
You need to make a donation
69 USDT for consumer radios
120 USDT for enterprise (Rm510b, RM700)
USDT Trc20 address
TPSj9VQFZRWBbgXXE3Xoj7xNzhDMFVPeDv
If you cannot use crypto let me know, what about PayPal?
PayPal (Friends and Family) Pay Andrea Zega using PayPal.Me
Once this is done send a screen or txid and you will receive the Google drive link!
Due to high demand it can take between 1h to 24h before you receive your package
Once the mod is installed it will be permanent until you update/ reset the radio, before doing so always check the website to make sure server is online and new firmware versions are compatible.
If you don't check you run the risk of losing your mod, and no refunds will be issued, thanks for understanding!
update to this version only if you have fcc mod already installed. install once more before update, then update, then install again,
my brother my question is whether even with the new version v01.03.1300 I can buy the mod!
I wouldn't want to give him 69 USD for something that can't be done!
Hi there mate, I'll reply for you. There is no hack possible for the most recent version on RC. It could be done only if you install the patch before updating.
question is answered in djircfcc telegram:
Attachments
I was on v0700 modded , updated controller to v1200 . applied 1.5.7 fcc patch , and the mod works again .
It's safe to update to FW .1300 if FCC is active?
I also found this video, but I dont have this option to change the bandwidth to 10 MHz for example. How to activate this?
Update: I made the update, and it's no Problem. FCC is still active. Also the manual bandwidth is no available. Only some thing is strange: My Controller says that I have to update the drone. But the FW is .700.
I also found this video, but I dont have this option to change the bandwidth to 10 MHz for example. How to activate this?
Update: I made the update, and it's no Problem. FCC is still active. Also the manual bandwidth is no available. Only some thing is strange: My Controller says that I have to update the drone. But the FW is .700.
Last edited:
what is the advantage of selecting a narrow channel? looks like a better signal.
regarding DJI updates. lately i noticed they hadly bring any new functionality to the table(drone shadow, AR home route)
The however seem to put a lot of effort in blocking the FCC hack.
regarding DJI updates. lately i noticed they hadly bring any new functionality to the table(drone shadow, AR home route)
The however seem to put a lot of effort in blocking the FCC hack.
Well, there will probably only be new functions for the Mini 4. The last update of the RC allows the Fly app to be updated separately, but I don't know how that's supposed to work. So far I haven't been offered an update.
Yes, with the 10 MHz channel the range is greater and the signal is more stable. You can see that in the video
I actually think the FCC hack works pretty well, even though 2 new firmwares have since been released.
Yes, with the 10 MHz channel the range is greater and the signal is more stable. You can see that in the video
I actually think the FCC hack works pretty well, even though 2 new firmwares have since been released.
they will probably fix it the same way as the 0400 procedure but with a different file to replace
regarding the mini 3 pro and mini 4. they are not that different and drone shadow/ar homepoint will not increase the workload that much.
maybee they will wait until they have sold enough mini 4 pro's
Similar threads
DJI Drone Deals
New Threads
-
-
-
DJI Mini 2, RC-N1 Controller, 2 Flight Batteries, Lykus hard case FOR SALE $245- Started by Chris Mitchell
- Replies: 0
-
-
Forum statistics
