some guy doing an FCC hack permanent for RC pro Controller

[TheMavic]

It works, but first check if you have ADB open. If so, you can update. Then check if you have the latest version of DJI Fly v. 01.12.08 in the controller (but check in the settings, not by the appearance of the application). If not, restore the controller to factory settings. And then you can upload the FCC hack.

Thanks bud

 

[NC96]

About to update my RC - can I confirm that this is still in FCC?

 

[pyrolator]

About to update my RC - can I confirm that this is still in FCC?

Looks like FCC.

 

[dvsls]

Correct. But this is only required if you lost your FCC while updating to version 01.03.0400 or higher.

So if I am on firmware V01.00.0700 with fcc on my remote with screen(dji mini 3 pro), then I don't need to do anything special to update to the latest firmware and still keep the FCC, right?

 

[tunning3]

Yes

 

[NC96]

Patched mine this morning, updated via DJI software, patched again after - All good and back on FCC I believe

 

[DAFlys]

hello, how to obtain FCC for the DJI RC V01.03.1200 controller, can someone give me the directions

Djircfcc.com

 

[mKober]

Czy muszę podmieniać pliki na fw 1200?

Jeśli nie masz otwartego ADB to tak.

 

[mKober]

Od czego to zależy, czy jest otwarty, czy zamknięty? Nigdy nie robiłem moda

Jeśli nie robiłeś moda przed wersja 1.03.300 to nie masz otwartego ADB. Więc tak, musisz podmienić plik przy wgrywaniu.

 

[tuxtard]

Anyone knows if the latest firmware version of RC 2 can be patched or not?

 

[mKober]

Anyone knows if the latest firmware version of RC 2 can be patched or not?

"It works, but first check if you have ADB open. If so, you can update. Then check if you have the latest version of DJI Fly v. 01.12.08 in the controller (but check in the settings, not by the appearance of the application). If not, restore the controller to factory settings. And then you can upload the FCC hack"

 

[mKober]

Czy można obniżyć wersję fw, aby uniknąć wymiany plików?

Od wersji 1.03.400 juz ch7ba nie idzie odnizyc wersji fw.

 

[sebanwo]

Anybody have link for working FCC DJI APP android redmi note 10 pro

DJI RC-N1 Remote Control for MINI 3 PRO​

please

 

[- MS -]

Anybody have link for working FCC DJI APP android redmi note 10 pro

DJI RC-N1 Remote Control for MINI 3 PRO​

please

Try the link in this YT video. It worked for me.

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

Accept third party cookies

 

[GravityRZ]

does anbody knows the changes from patch 1.4 to 1.5

i am currently still on 0100 firmware
first patched with v1.3 and later on again with v1.4

what would be the the way to upgrade from 0100 to the latest with 1.4 patch in place.

upgrade straight to latrest FW
run 1.5 patch again

or
while on 0100 run patch 1.5
upgrade to latest fw
run 1.5 patch again

 

[fischli]

1. The "mag" command has been added. You can now use the "mag off" command to turn off the compass error in case the aircraft cannot take off due to a compass error. Note that this only removes the error and the drone will still use the compass data.

2. The "aled" and "vled" commands will work even after reboot the remote control or drone, so now you only need to set it once instead of having to reset it every time you turn on drone.

 

[Retrosling]

1. The "mag" command has been added. You can now use the "mag off" command to turn off the compass error in case the aircraft cannot take off due to a compass error. Note that this only removes the error and the drone will still use the compass data.

2. The "aled" and "vled" commands will work even after reboot the remote control or drone, so now you only need to set it once instead of having to reset it every time you turn on drone.

how do we update to the latest version of the installation software?

 

[fischli]

run the latest djifcc.exe like the procedure as every time

 

[GravityRZ]

current fw 0100 with patch 1.4 active

run dji assistant 2 to confirm there is a good connection between controller and computer(Rc controller recognized)
exit dji asisstant
run check_adb
adb not running
run djifcc (v1.5)
fcc patch completed succesfully
run check_adb again
adb running

run dji assistant 2 again and upgrade to fw level 1200
after upgrade
run check_adb
adb still running
run djifcc (v1.5)
fcc patch completed succesfully

verified graphics and still in FCC mode.


o man, now is the time DJI should release new firmware which includes drone shadow and AR return to home

 

[Retrosling]

run the latest djifcc.exe like the procedure as every time

Yes, I'm looking for the latest version of djifcc.exe I can't see it on the site.